Hello, I have a problem with asterisk and Grandstream BudgeTone-100. With default configuration everything works (in anonymous mode and fixed IP), but if Im trying to enable registering, it dos not work. I used 'sip debug' and verbose level 10, nothing happens if I switch telephone on (no messages about bad auth etc). As I understood, after switching phone on at first it will try to register in asterisk if Im trying to call somewhere.
I searched in list-archive and I didnt found that anybody else has this kind of problem. I read also: http://lists.digium.com/pipermail/asterisk-users/2003-June/013288.html and I did so. sip.conf --------- [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls disallow=all ; Disallow all codecs allow=g729 [cisco] context=in type=friend insecure=yes host=<removed> dtmfmode=rfc2833 [grandstream1] type=friend secret=grandstream1 host=dynamic context=class1 dtmfmode=rfc2833 [grandstream2] type=friend secret=grandstream2 nat=yes host=dynamic context=class1 dtmfmode=rfc2833 Asterisk ver: Asterisk CVS-01/22/04-18:13:23 Grandstream ver: Program--1.0.3.81 Bootloader--1.0.0.7 HTML--1.0.0.18 * And as I mentioned before, without registration and with static IP everything works, it seems, that something is misconfigured in my setup for authentication or this phone firmware is buggy? (but its latest, I checked www.grandstream.com) ____________________________ Best Regards: Key Aavoja /* Never argue with an idiot. They drag you down to their level, then beat you with experience.*/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
