This is done while the calls are active? I just issued the command and got nothing, but there where no active calls.
Gary Baribault On 06/01/2010 03:45 PM, Danny Nicholas wrote: > My assumption is that inbound/outbound calls are DAHDI and that internal > calls are SIP. Can OP post "core show channels" from working and > non-working calls? > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Gary Baribault > Sent: Tuesday, June 01, 2010 2:20 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] no sound between extensions > > Hello all, > > I have Asterisk 1.4.26 installed on an OpenSuSE 11.2 server with a > Digium 8 port FXO card. The local network is 100Mbps Ethernet and my > phones are Linksys SPA-921 or Linksys Analog adaptors. > > The phones are setup with DHCP, and are on the same flat non-routed > network. There is no NAT involved. > > If I call from extension 6000 to extension 6001, or vice-versa both > are SPA-921s. The 6001 rings, but when the phone is picked up, I have > no sound. I have the same problem between any phones in the system, > but this is the simplest example. > > Incoming calls and outgoing calls work fine, sound is correct. > Voice mail works fine as well, the IVR works great. > > Any ideas? > > Gary Baribault > > > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
