Thanx Zeeshan, I forgot to thank you , doing qualify=yes shows the status and its active. 1> Name/username Host Dyn Nat ACL Port Status wlg-gateway 202.7.4.40 5060 Unmonitored 2002/2002 (Unspecified) D N 0 Unmonitored 2001/2001 172.26.48.113 D N 5061 OK (1 ms) 3 sip peers [Monitored: 1 online, 0 offline Unmonitored: 1 online, 1 offline]
2>And yes i didn't know that about 'sip show registry'. 3>And I am still stuck with the 3rd problem. Can you just tell me in the above output on the asterisk server, if i have to call the user 2...@172.26.48.113, through a php script and not softphone. Because my sofphone can call it. This is very silly problem . Please rescue me. status is Ok and online. i posted the last files to the list also. On 16 June 2010 18:58, Zeeshan Zakaria <zisha...@gmail.com> wrote: > you should post this to the list, not to my personal email. > > Zeeshan A Zakaria > > -- > www.ilovetovoip.com > > On 2010-06-16 2:45 AM, "nikhil singhania" <niksingha...@gmail.com> wrote: > > Here is my extensions.conf: > [general] > static=yes ; default values for changes to this file > writeprotect=no ; by the Asterisk CLI > [globals] > ; variables go here > [default] > ; default context > [phones] > ; context for our phones > exten => 2001,1,Dial(SIP/2001) > exten => 2002,1,Dial(SIP/2002) > exten => 500,1,Answer() > exten => 500,2,Playback(demo-echotest) > > ; Let them know what's going on > exten => 500,3,Echo > > ; Do the echo test > exten => 500,4,Playback(demo-echodone) > > ; Let them know it's over > exten => 500,5,Hangup > exten => _.,1,Dial(SIP/${ext...@wlg-gateway) ; match anything and > send to wlg-gateway > exten => _.,2,Hangup > [from-wlg-gateway] > ; context for calls coming from wlg-gateway > exten => 4980007,1,Dial(SIP/2001&SIP/2002) > exten => _.,1,Congestion() > > ; everyone else gets congestion > > > > > > .............................................................................................................................. > sip.conf > > ........................................................................................................ > [general] > context=default ; Default context for incoming calls > port=5060 ; UDP Port to bind to (SIP standard port is 5060) > bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) > srvlookup=yes ; Enable DNS SRV lookups on outbound calls > [2001] > type=friend ; both send and receive calls from this peer > host=dynamic ; this peer will register with us > username=2001 > secret=j0nny > canreinvite=no ; don't send SIP re-invites (ie. terminate rtp stream) > nat=yes ; always assume peer is behind a NAT > context=phones ; send calls to 'phones' context > dtmfmode=rfc2833 ; set dtmf relay mode > allow=all ; allow all codecs > [2002] > type=friend > host=dynamic > username=2002 > secret=whyfry > canreinvite=no > nat=yes > context=phones > dtmfmode=rfc2833 > allow=all > [wlg-gateway] > type=friend > disallow=all > allow=ulaw > context=from-wlg-gateway > host=202.7.4.40 > canreinvite=no > dtmfmode=rfc2833 > allow=all > > ..................................................................................................... > inbound.php > > .................................................................................................. > #!/usr/bin/php > > <?php > > ob_implicit_flush(true); > set_time_limit(0); > echo("Hello, world!"); > > require_once "phpagi.php"; > error_reporting(E_ALL); > echo("Hello, world!"); > > $dir_base = "/var/www/wizoz/"; > echo $dir_base; > $dir_prompt = $dir_base."prompts"; > $dir_wav = $dir_base."wav"; > $rel_dir_mp3 = "mp3"; > $dir_mp3 = $dir_base.$rel_dir_mp3; > $agi = new AGI(); > echo("created"); > $agi->answer(); > $agi->exec_dial("SIP","2002"); > $agi->stream_file($dir_prompt.'/welcome','123'); fflush($agi->out); > > $agi->stream_file($dir_prompt.'/welcome','123'); fflush($agi->out); > echo("Hello, world!"); > > > ?> > > .................................................................................................. > Though I am new, but i am somewhat familiar, and am devoting a great deal > of time. Now you have all the files. I highlited the exec_dial function. > This inbound.php is the file i am executing on the command line on the > server. But I am not gettting the call at my end. May be the way i am doing > it is wrong. Please suggest me. Rest of the code works fine. > > > > > > > On 15 June 2010 18:15, Zeeshan Zakaria <zisha...@gmail.com> wrote: > > > > The r... > > cont...@9793905858 > email: rit2007...@iiita.ac.in > niksingha...@gmail.com > http://profile.iiit... > > -- Nikhil Kumar summer intern:simmortel voice technologies rit2007033 b.tech IT 6th sem IIIT Allahabad cont...@9793905858 email: rit2007...@iiita.ac.in niksingha...@gmail.com http://profile.iiita.ac.in/RIT2007033/
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users