I am installing a used DG104S.... I got it to ring from gnophone, but all I got was fast busies. so I upgraded based on Pavel's link:
ftp://ftp.dlink.ru/pub/VoIP/DG-104S/Firmware/MGCPDG104.zip So I now have: PROM Version: 3.0B22-D RUNTIME Version: 3.0B44-D But when I pick the phone up I get: ggdbg>000001604 DIM: 0 DSP ERROR: Reason= DIM ERROR: State Timeout 000001604 DIM: 0:*, State Timeout Error (State = WAIT_RESTART_IND) 000001604 DIM: 0:*, BRINGING DSP DOWN !! 000001604 DSP 0 Failure. Error: -1 000001604 CCU: 0, DSP Failure. State: 2 000001604 xGCP: ERROR 0X105 in .\src\ggxgcpif.c at line 3761 (coding err) 000001604 CCU: 0, Coding now (officially) free 000001604 tcid 0. NO DSP RESOURCES 000001604 xgcpimh: CA message rejected Is there another setting I have that is causing this? I did a factory reset. I then downgraded to dg104S_runtime_b35.bin But it would not keep the changes to the CA string, either via the web or console... Any ideas? Thanks! -- Zot O'Connor <[EMAIL PROTECTED]> White Knight Hackers, Inc. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
