Hi Guys, An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out:
[Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc pbx*CLI> dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo default default In Service 1 from-pstn default In Service 2 from-pstn default In Service 3 from-pstn default In Service 4 from-pstn default In Service 5 from-pstn default In Service 6 from-pstn default In Service 7 from-pstn default In Service 8 from-pstn default In Service pbx*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) pbx*CLI> dahdi show regdump 1 Unable to get registers on channel 1 Unable to get stats on channel 1 [Trixbox]# dahdi_hardware -v /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1044207] connect...@usb-0000:00:1d.7-4 XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC Note: This Astribank is deployed in United Arab Emirates and I am not sure what the line type is in terms of Ground or Loop start and wondering if that makes a difference with the Astribank and the fact that it can't how the voltage using "show regdump" And I am definitly not sure what that warning of OLD DRIVER is about. Any help is appreciated. Thanks,
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
