On 6/22/2010 2:03 AM, Tzafrir Cohen wrote: > On Mon, Jun 21, 2010 at 09:08:02AM -0700, Scott Stingel wrote: > >> Hello- >> >> I have a system with one D410P and one B200P (both OpenVox). All is >> well with the D410P, inbound and outbound, and I can initiate calls on >> the B200P BRI span, but there may be something wrong with my inbound >> BRI setup: there is no indication of an inbound call when I dial in to >> it from the PSTN. >> >> When I run "pri intense debug" and make a call to the BRI span, I can >> see a message containing the DDI that I'm dialing, in this case 336027 >> (BT supplies only the last 6 digits of a delivered number). See debug >> output below... >> > Is there anything you see in the dialplan trace itself? > > Also, 'intense debug' shows a lot of noise of ISDN layer 2 (Q.921). But > that is normally not interesting. Do you see anything on a simple 'pri > debug span 1' (only layer 3 debug)? > > >> Have I neglected to set up some needed parameter? This all worked on >> older boards when using bristuff, but now I want to use dahdi. My >> client is in the UK, connected to BT, and I have specified "euroisdn" as >> the switch type. >> >> many thanks >> >> --------------------------------------------------------------------------------------------- >> (snippet during inbound call to "336027") >> >> < Supervisory frame: >> < SAPI: 00 C/R: 0 EA: 0 >> < TEI: 000 EA: 1 >> < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] >> < N(R): 008 P/F: 1 >> < 0 bytes of data >> -- ACKing all packets from 8 to (but not including) 8 >> -- Stopping T200 timer >> -- Starting T203 timer >> > Shouldn't an RR be sent back? > > >> Handling message for SAPI/TEI=0/0 >> TEI: 0 State 7 >> V(S) 8 V(A) 8 V(R) 8 >> K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0 >> T200 0, N200 3, T203 1 >> >> < [ 02 ff 03 08 01 01 05 a1 04 03 80 90 a3 18 01 89 1e 02 84 83 6c 02 21 >> a3 70 07 81 33 33 36 30 32 37 ] >> >> < Unnumbered frame: >> < SAPI: 00 C/R: 1 EA: 0 >> < TEI: 127 EA: 1 >> < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] >> < 30 bytes of data >> Handling message for SAPI/TEI=0/127 >> TEI: 0 State 7 >> V(S) 8 V(A) 8 V(R) 8 >> K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0 >> T200 0, N200 3, T203 1 >> >> < [ 02 ff 03 08 01 01 05 a1 04 03 80 90 a3 18 01 89 1e 02 84 83 6c 02 21 >> a3 70 07 81 33 33 36 30 32 37 ] >> >> < Unnumbered frame: >> < SAPI: 00 C/R: 1 EA: 0 >> < TEI: 127 EA: 1 >> < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] >> < 30 bytes of data >> Handling message for SAPI/TEI=0/127 >> --------------------------------------------------------------------------------------------- >>
Thanks, will try the less intense debug. I thought it was interesting however that the incoming DDI was in the message, but not showing up in the dialplan trace.. -Scott -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users