Thanks for taking a look. I am using the latest 1.4.33.1 source packages, (latest libpri, latest dahdi) as of yesterday.
The link is definitely not down, but since this is delivered via DS3 with a MUX I assume that only means that the wire from the MUX to the Digium card is ok, but says nothing about the DS3 timelsot. Since it worked fine prior to a reboot (after which, I assume, the dahdi services jumped from some old version to the newest one I had) I hesitate to blame my provider, but I've opened a ticket with them just in case. Mike > -----Original Message----- > From: [email protected] [mailto:asterisk-users- > [email protected]] On Behalf Of Tzafrir Cohen > Sent: Wednesday, June 23, 2010 3:09 > To: [email protected] > Subject: Re: [asterisk-users] PRI span problem - no D channel > > On Tue, Jun 22, 2010 at 09:30:39AM -0400, Mike wrote: > > Hi, > > > > > > > > I have the following happen to me after the restart of one of my servers: > > out of my 3 PRIs (all configured with the same technical settings), the > last > > one isn't coming back. It's underutilized (chances it didn't get a call > > since my reboot), if it makes a difference . > > > > > > > > The PRI goes from provisioned to unprovisioned, and I get this regularly: > > > > [Jun 22 09:03:48] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No > > D-channels available! Using Primary channel 72 as D-channel anyway! > > > > > > > > Here is my PRI debug span: > > > > > > > > -- Timeout occured, restarting PRI > > > > q921.c:468 t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > Sending Set Asynchronous Balanced Mode Extended > > > > q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH > > > > [Jun 22 09:03:48] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No > > D-channels available! Using Primary channel 72 as D-channel anyway! > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > All the above messages lead me to suspect there's no active D-channel. > But, > > > > > -- Got SABME from network peer. > > A certain message has managed to get through from the remote party. > Layer 1 can't be completely down. > > What version of Asterisk is it? What version of libpri? > > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Timeout occured, restarting PRI > > > > q921.c:468 t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > Sending Set Asynchronous Balanced Mode Extended > > > > q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH > > > > [Jun 22 09:04:19] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No > > D-channels available! Using Primary channel 72 as D-channel anyway! > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > Sending Set Asynchronous Balanced Mode Extended > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > -- Got SABME from network peer. > > > > Sending Unnumbered Acknowledgement > > > > q921.c:858 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED > > > > q921.c:805 q921_dchannel_up: q921_state now is > > Q921_LINK_CONNECTION_ESTABLISHED > > > > edison*CLI> pri no debug span 3 > > > > Disabled debugging on span 3 > > > > [Jun 22 09:04:51] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No > > D-channels available! Using Primary channel 72 as D-channel anyway! > > -- > Tzafrir Cohen > icq#16849755 jabber:[email protected] > +972-50-7952406 mailto:[email protected] > http://www.xorcom.com iax:[email protected]/tzafrir > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
