Hi Gareth,Thanks for replying. Here is the SIP debug from the CLI. I assume that the first two blocks are from having qualify=yes and the remaining are from attempting to place a call.
Do you know what "SIP/2.0 480 No Routes Found" means? It looks like the SIP provider cannot find my box.
Thanks, Andy CST4*CLI> sip set debug on SIP Debugging enabled Reliably Transmitting (no NAT) to 192.168.34.1:5060: OPTIONS sip:192.168.34.1 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.14:5060;branch=z9hG4bK7a19a314;rport Max-Forwards: 70 From: "asterisk" <sip:[email protected]>;tag=as613ee548 To: <sip:192.168.34.1> Contact: <sip:[email protected]> Call-ID: [email protected] CSeq: 102 OPTIONS User-Agent: Asterisk PBX 1.6.2.5-0ubuntu1 Date: Wed, 21 Jul 2010 03:47:46 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO Supported: replaces, timer Content-Length: 0 --- CST4*CLI> <--- SIP read from UDP:192.168.34.1:5060 ---> SIP/2.0 480 No Routes FoundVia: SIP/2.0/UDP 172.28.20.106:60017;received=172.28.20.106;branch=z9hG4bK7a19a314;rport=60017
From: "asterisk" <sip:[email protected]>;tag=as613ee548 To: <sip:192.168.34.1>;tag=aprqngfrt-6c6p2t00000c6 Call-ID: [email protected] CSeq: 102 OPTIONS <-------------> --- (6 headers 0 lines) ---Really destroying SIP dialog '[email protected]' Method: OPTIONS
-- Remote UNIX connection
-- Attempting call on SIP/MTN-NEW/084xxxyyyy for application
MP3Player(/var/www/andy/calls/foschini.mp3) (Retry 1)
== Using SIP RTP CoS mark 5 Audio is at 192.168.0.14 port 12350 Adding codec 0x2 (gsm) to SDP Adding codec 0x1 (g723) to SDP Adding codec 0x4 (ulaw) to SDP Adding codec 0x100 (g729) to SDP Adding non-codec 0x1 (telephone-event) to SDP Reliably Transmitting (no NAT) to 192.168.34.1:5060: INVITE sip:[email protected] SIP/2.0 Via: SIP/2.0/UDP 192.168.0.14:5060;branch=z9hG4bK305454ce;rport Max-Forwards: 70 From: "Andy" <sip:[email protected]>;tag=as0140b1e4 To: <sip:[email protected]> Contact: <sip:[email protected]> Call-ID: [email protected] CSeq: 102 INVITE User-Agent: Asterisk PBX 1.6.2.5-0ubuntu1 Date: Wed, 21 Jul 2010 03:47:51 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO Supported: replaces, timer Content-Type: application/sdp Content-Length: 386 v=0 o=root 1528469633 1528469633 IN IP4 192.168.0.14 s=Asterisk PBX 1.6.2.5-0ubuntu1 c=IN IP4 192.168.0.14 t=0 0 m=audio 12350 RTP/AVP 3 4 0 18 101 a=rtpmap:3 GSM/8000 a=rtpmap:4 G723/8000 a=fmtp:4 annexa=no a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- CST4*CLI> <--- SIP read from UDP:192.168.34.1:5060 ---> SIP/2.0 100 TryingVia: SIP/2.0/UDP 172.28.20.106:60017;received=172.28.20.106;branch=z9hG4bK305454ce;rport=60017
From: "Andy" <sip:[email protected]>;tag=as0140b1e4 To: <sip:[email protected]> Call-ID: [email protected] CSeq: 102 INVITE <-------------> --- (6 headers 0 lines) --- CST4*CLI> <--- SIP read from UDP:192.168.34.1:5060 ---> SIP/2.0 488 Not Acceptable HereVia: SIP/2.0/UDP 192.168.0.14;received=172.28.20.106;branch=z9hG4bK305454ce;rport=60017
From: "Andy" <sip:[email protected]>;tag=as0140b1e4 To: <sip:[email protected]>;tag=SD7ojh898-4C466D62-548CB9C-0ADE2C09 Call-ID: [email protected] CSeq: 102 INVITE Reason: Q.850 ;cause=127 ;text="Interworking, unspecified" Content-Length: 0 <-------------> --- (8 headers 0 lines) --- Transmitting (no NAT) to 192.168.34.1:5060: ACK sip:[email protected] SIP/2.0 Via: SIP/2.0/UDP 192.168.0.14:5060;branch=z9hG4bK305454ce;rport Max-Forwards: 70 From: "Andy" <sip:[email protected]>;tag=as0140b1e4 To: <sip:[email protected]>;tag=SD7ojh898-4C466D62-548CB9C-0ADE2C09 Contact: <sip:[email protected]> Call-ID: [email protected] CSeq: 102 ACK User-Agent: Asterisk PBX 1.6.2.5-0ubuntu1 Content-Length: 0 --- > Channel SIP/MTN-NEW-00000003 was never answered.[Jul 21 05:47:51] NOTICE[30442]: pbx_spool.c:339 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy) Really destroying SIP dialog '[email protected]' Method: INVITE
-- Remote UNIX connection disconnected
CST4*CLI>
On 20/07/2010 06:24 PM, Gareth Blades wrote:
Posting a sip debug will probably be helpfull aswell as you can see exactly where the traffic is being sent and what the response was. Andy Beak wrote:Hi, Thanks, I added that. I'll ask my network provider if they received these message tomorrow morning. That will narrow things down to either an Asterisk configuration or a network routing issue. There is not really a caller, I'm trying to use Asterisk as an Automated Voice Message server to dial phone numbers and play an mp3. I'm using my mobile phone to test on and it doesn't ring. Asterisk gives the following message immediately after reading the .call file from the spool directory: -- Attempting call on SIP/MTN-NEW/mynumber for application MP3Player(/myfile) (Retry 1) == Using SIP RTP CoS mark 5 > Channel SIP/MTN-NEW-00000001 was never answered. [Jul 20 18:07:37] NOTICE[22259]: pbx_spool.c:339 attempt_thread: Call failed to go through, reason (8) Congestion (circuits busy) Because the phone doesn't ring and the error message appears immediately I don't think it's a timeout issue. Will reading the source for pbx_spool.c at line 339 give any clues as to what's happening or will that be a waste of time? Cheers, Andy On 20/07/2010 05:42 PM, Gareth Blades wrote:If you add qualify=yes to the setting in sip.conf it will send a sip message to the peer every 60 seconds to check if it is alive. If you try to make a call while the peer is not alive it will fail immediatly rather than the caller hearing silence while your box waits for a reply timeout. Andy Beak wrote:Hi, No that is the correct address. I know it is an internal IP. We have our machine hosted in racks at our SIP providers data center. They've patched a new port to our cabinet and linked that to a gateway (172.28.20.105). As long as we use that gateway (and the IP address they assigned to us) our traffic will reach their SBC. I've confirmed that traceroute follows the path it is supposed to: traceroute to 192.168.34.1 (192.168.34.1), 30 hops max, 60 byte packets 1 192.168.0.1 (192.168.0.1) 0.656 ms 0.562 ms 0.501 ms 2 172.28.20.105 (172.28.20.105) 1.211 ms 1.209 ms 1.196 ms 3 192.168.34.5 (192.168.34.5) 23.270 ms 23.269 ms 23.328 ms 4 * * * 5 * * * 6 * * *^C Is there a way to test in Asterisk if it is able to reach a particular IP address? Do you think that there is a routing problem here? Thanks, Andy On 20/07/2010 04:58 PM, Zeeshan Zakaria wrote:This "host=192.168.34.1" is where you'll put your provider's IP address. Currently you are using some local address which is not your provider's IP address. Where did you get it from? Call your providrr and ask them the IP address of the server where you'll be sending your calls. Zeeshan A Zakaria -- www.ilovetovoip.com<http://www.ilovetovoip.com>On 2010-07-20 10:27 AM, "Andy Beak"<[email protected] <mailto:[email protected]>> wrote: Hi, I set my list to subscribe to digest and I can't see how to reply to your reply without starting a new thread. There is no need for SIP username and password because the provider authenticates me on my IP address. I thought that "host=192.168.34.1" would be the sip provider IP address. At this point I don't need to accept incoming calls or place VOIP-to-VOIP. All I need to do is connect to their PBX to place a call to a cellphone. I reread all the documentation I could find and couldn't see where else in sip.conf I should set the provider IP. Thanks for your reply, AndyIn your sip.conf, there is no mention of your sip provider's IPaddress, username and secret (pa... www.ilovetovoip.com<http://www.ilovetovoip.com> <http://www.ilovetovoip.com>On 2010-07-20 5:09 AM, "Andy Beak"<andr...@xxxxxxxxxxxxxxx<mailto:andr...@xxxxxxxxxxxxxxx<mailto:andr...@xxxxxxxxxxxxxxx>>> wr... -- _____________________________________________________________________ -- Bandwidth and Colocation Provided byhttp://www.api-digital.com <http://www.api-digital.com> -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.aste... -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
smime.p7s
Description: S/MIME Cryptographic Signature
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
