Check your dialplan.xml file that the affected phones are loading.
Thanks, --Warren Selby On Jul 25, 2010, at 10:52 AM, Kevin Keane <[email protected]> wrote: > I recently inherited an Asterisk system (PBX in a Flash, based on > Asterisk 1.4 and FreePBX). The phones are mostly Cisco 7960 phones > with the SIP firmware. > > > > The Asterisk setup relies heavily on queues with dynamic agents. The > problem I am having is that on SOME (but not all) the Cisco phones, > the phone will not allow dialing a second *. As a result, the agent > can log in to queue 600 by dialing 600* but cannot log out again > with 600**. > > > > Is this due to a setting on the phone, or within Asterisk? I suspect > it is on the phone, since not all devices are affected. > > > > I’d appreciate help with tracking down which setting might cause thi > s! > > > > Thanks! > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
