hi, just taking a wild guess here, are the extensions set to be in the same pickupgroup?
regards ron On 8/15/10 7:01 AM, Cassius Smith wrote: > Hi all, > There are a lot of posts around the web about my question; unfortunately > I have not been able to get any of the solutions to work. I'm using > Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working > for the secretaries that monitor their bosses' phones. > > The BLF and the speed dial works great on the Linksys phones. Call > pickup is the problem. > > My features.conf has *8 as the pickupexten in features.conf. > > On the SPA's the extended function is: > fnc=blf+sd+cp;sub=...@$proxy;ext=...@$proxy > > the "SPA932 Call Pickup Code:" field is set to *8. > > I ring the extension; the lamp flashes on the shared line on the SPA, > just like it should. When I press the flashing lamp, the CLI gives me: > > Notice [1328] Nothing to pick up for baf8bc-e23bc...@192.168.1.39 > > note: (this is the ip address of the SPA-942 in this case) > then > Got SIP response 603 "Decline" back from 192.168.1.47 > note: (this is the ringing extension, in this case a Polycom 330). > > I have tried different pickup codes, and some web pages say to add a # > at the end of the call pickup code. When I do that, the CLI says > > "Notice [1328] Call from '602' to extension '**600' rejected because > extension not found" > > So - how to resolve this? Do I need dialplan code to handle this? I get > the clue from "nothing to pickup for blah blah" that I'm close but may > be missing something simple. > > Thanks all > > Cassius > > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users