They are FXO modules and yes, the lines are coming in from the telco.
On 8/23/2010 12:05 PM, Doug Dawson wrote:
The card you installed has FXO or FXS modules in it ????? are you
getting your lines directly from the telco co???
Doug D
On Mon 23/08/10 8:37 AM , Cassius Smith [email protected] sent:
* -----Original Message-----
* From: Todd Reese <[email protected] <mailto:[email protected]>>
* Reply-to: Asterisk Users Mailing List - Non-Commercial
Discussion <[email protected]
<mailto:[email protected]>>
* To: [email protected]
<mailto:[email protected]>
* Subject: [asterisk-users] Dahdi install gone wrong
* Date: Mon, 23 Aug 2010 10:26:58 -0400
*
* Hi All,
*
*
* I've got a project installing a Digium TDM800P card with 8 FXO's
in an
* Asterisk box.
*
*
* The computer is running Slackware 13.1 and I've installed the
current
* Dahdi and Asterisk 1.6.2.11.
*
*
* I've installed several boxes that are pure VOIP but, I haven't
installed
* a Dahdi interface and I'm stumped. I've got it to the point of
Dahdi
* seeing the card and Asterisk recognizing dahdi but, I can't see
any
* channels for the calls to come in on.
*
* I've had to borrow files from an old config of Trixbox (the
machine was
* underpowered) to get to the point where I am in my setup.
*
* I would like to inquire some help from the group to get me up
and
* receiving calls on the card.
*
*
* Regards,
*
* Todd Reese
*
* Include:
*
*
* ============chan_dahdi.conf==========
*
*
* ; Configuration file
*
* [trunkgroups]
*
* [channels]
*
* language=en
* context=from-zaptel
* signalling=fxs_ks
* rxwink=300 ; Atlas seems to use long (250ms) winks
* ;
* ; Whether or not to do distinctive ring detection on FXO lines
* ;
* ;usedistinctiveringdetection=yes
*
* usecallerid=yes
* hidecallerid=no
* callwaiting=yes
* usecallingpres=yes
* callwaitingcallerid=yes
* threewaycalling=yes
* transfer=yes
* cancallforward=yes
* callreturn=yes
* echocancel=yes
* echocancelwhenbridged=no
* ;echotraining=800
* rxgain=0.0
* txgain=0.0
* group=0
* callgroup=1
* pickupgroup=1
* immediate=no
*
* ;faxdetect=both
* faxdetect=incoming
* ;faxdetect=outgoing
* ;faxdetect=no
*
* ;Include setup-pstn configs
* #include dahdi-channels.conf
*
* group=1
*
* ;Include PBXconfig configs
* #include chan_dahdi_additional.conf
*
*
*
* ============dahdi-channels.conf=============
*
* ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18
20:25:02 2010
* ; If you edit this file and execute /usr/sbin/dahdi_genconf
again,
* ; your manual changes will be LOST.
* ; Dahdi Channels Configurations (chan_dahdi.conf)
* ;
* ; This is not intended to be a complete chan_dahdi.conf. Rather,
it is
* intended
* ; to be #include-d by /etc/chan_dahdi.conf that will include the
global
* settings
* ;
*
* ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
* ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 1
* callerid=
* group=
* context=default
*
* ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 2
* callerid=
* group=
* context=default
*
* ;;; line="3 WCTDM/0/2 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 3
* callerid=
* group=
* context=default
*
* ;;; line="4 WCTDM/0/3 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 4
* callerid=
* group=
* context=default
*
* ;;; line="5 WCTDM/0/4 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 5
* callerid=
* group=
* context=default
*
* ;;; line="6 WCTDM/0/5 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 6
* callerid=
* group=
* context=default
*
* ;;; line="7 WCTDM/0/6 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 7
* callerid=
* group=
* context=default
*
* ;;; line="8 WCTDM/0/7 FXSKS (SWEC: MG2)"
* signalling=fxs_ks
* callerid=asreceived
* group=0
* context=from-pstn
* channel => 8
* callerid=
* group=
* context=default
*
*
* =====system.conf=============
*
*
* # Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22
19:34:02 2010
* # If you edit this file and execute /usr/sbin/dahdi_genconf
again,
* # your manual changes will be LOST.
* # Dahdi Configuration File
* #
* # This file is parsed by the Dahdi Configurator, dahdi_cfg
* #
* # Global data
*
* loadzone = us
* defaultzone = us
*
* # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
* fxsks=1
* #echocanceller=mg2,1
* fxsks=2
* #echocanceller=mg2,2
* fxsks=3
* #echocanceller=mg2,3
* fxsks=4
* #echocanceller=mg2,4
* fxsks=5
* #echocanceller=mg2,5
* fxsks=6
* #echocanceller=mg2,6
* fxsks=7
* #echocanceller=mg2,7
* fxsks=8
* #echocanceller=mg2,8
Can you include the germane part of the dialplan also?
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com
<%3Ca%20href=>">http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
<%3Ca%20href=>">http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
<%3Ca%20href=>">http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------
Msg sent via High Desert Internet Webmail - http://www.hdiss.net
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
