On 8/30/2010 11:42 AM, jeremy.hellst...@synovate.com wrote: > I tried those as you said, deleting my failed attempt. I've found that > using hardhdlc=24 generates an error and reminds me that FXO uses FXS > signalling and vice versa when running dadhi_restart, which seems to > indicate that it is the wrong variable name. > That makes no sense. You are configuring a PRI, not an analog line. You should not be getting any messages regarding FXO or FXS. Take a look at the file again and delete any reference to analog channels if you are not using them.
Andres http://www.neuroredes.com > I also notice that if I change that variable to dchan in system.conf, I > receive no error but no matter what value I put in Asterisk looks at > channel 24 for the dchannel and as this is a half turned up PRI I have > suspicions that the dchan is not 24 though I still need TELUS to get > back to me to confirm that. > > Any other ideas as to what I am doing wrong or if I am making a bad > assumption? > > Thanks, Jeremy > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Andres > Sent: August 28, 2010 10:32 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] TELUS British Columbia PRI Settings > > On 8/28/2010 12:59 PM, jeremy.hellst...@synovate.com wrote: > >> I'm not surprised both the conf file and myself are confused. >> >> ______________________________________________ >> >> I still end up with messages telling me that a dchannel cannot be >> found. Any other suggestions? >> >> Thanks, Jeremy >> >> >> > I suggest you start over as I can see you are still confused about the > content of the 2 files and still trying to use spanmap. > > Start with /etc/dahdi/system.conf: > ------------- > loadzone=us > defaultzone=us > span=1,1,0,esf,b8zs > bchan=1-23 > hardhdlc=24 > ---------------- > > ...and /etc/asterisk/chan_dahdi.conf: > ---------------- > language=en > context=from-pstn > switchtype=national > signalling = pri_cpe > group=1 > channel => 1-12 > --------------- > > That is the most basic stuff you need to get the PRI up. > > Andres > http://www.neuroredes.com > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users