_____ From: [email protected] [mailto:[email protected]] On Behalf Of Joel Maslak Sent: Friday, September 17, 2010 12:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Rotary phone on Asterisk
I'm trying to use a couple of old Western Electric type 500 phones (desk model, rotary dial). These phones work fine, as tested with telco lines (they dial, receiver/transmitter works fine, etc). I'm running Asterisk 1.6.2.11. I can't get them to dial through Asterisk. They are connected to a Rhino channel bank which is connected to Asterisk via a Sangnoma card (T1 with echo cancellation). Other phones (touch tone) work fine, as does any phone with a pulse/tone switch, even when these electronic phones are in "pulse" mode. I'm thinking that Asterisk is a bit too picky about the timing of the rotary dial pulses to handle a mechanical system. Is there any way to correct this? Check this out http://www.voip-info.org/wiki/index.php?page=Asterisk+zaptel+pulse+dialing
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
