Hello Ron..

The answer that i see here is only a trying to a Register...means the
REGISTRATION procedures are taking a significant amount of time.

You should get a 200 OK

Can you lease make a simple draw of your architecture? seems to be a NAT
problem, that's for sure

REgards!

2010/9/28 Ron <nha...@gmail.com>

> Hi Danny
>
> On the pap2 by default it is set to 3600 and i have not change that.
> by the way, is the NAT keep-alive same with the NOTIFY message? coz i am
> seeing my asterisk respond to those as bad event could that be causing
> it to loose the registration?
>
> here's the registration from ngrep:
>
> U 78.65.34.12:5094 -> 12.34.56.78:5060
> REGISTER sip:sip.mydomain.com SIP/2.0.
> Via: SIP/2.0/UDP 78.65.34.12:5094;branch=z9hG4bK-25a5eec4;rport.
> From: Kristine <sip:456...@sip.mydomain.com<sip%3a456...@sip.mydomain.com>
> >;tag=68fc368d164925e0o0.
> To: Kristine <sip:456...@sip.mydomain.com <sip%3a456...@sip.mydomain.com>
> >.
> Call-ID: c9bd8b57-f7bdc...@192.168.1.52.
> CSeq: 116228 REGISTER.
> Max-Forwards: 70.
> Contact: Kristine <sip:456...@78.65.34.12:5094>;expires=3600.
> User-Agent: Linksys/PAP2T-3.1.15(LS).
> Content-Length: 0.
> Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER.
> Supported: x-sipura.
> .
>
>
> U 12.34.56.78:5060 -> 78.65.34.12:5094
> SIP/2.0 100 Trying.
> Via: SIP/2.0/UDP
> 78.65.34.12:5094;branch=z9hG4bK-25a5eec4;received=78.65.34.12;rport=5094.
> From: Kristine <sip:456...@sip.mydomain.com<sip%3a456...@sip.mydomain.com>
> >;tag=68fc368d164925e0o0.
> To: Kristine <sip:456...@sip.mydomain.com <sip%3a456...@sip.mydomain.com>
> >.
> Call-ID: c9bd8b57-f7bdc...@192.168.1.52.
> CSeq: 116228 REGISTER.
> User-Agent: Asterisk PBX.
> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO.
> Supported: replaces.
> Content-Length: 0.
>
>
> On 9/28/10 7:24 PM, Danny Dias wrote:
> > You have to increase the time of expiration for the Register...on linksys
> > devices is located on Proxy and Registration section under the EXTN:
> (Where
> > N is the extension number)
> >
> > Try putting this to: 3600
> >
> > To check wheter or not is loosing Register, try with ngrep-sip and check
> it:
> >
> > ngrep -p -q -W byline port 5060>register.pkt
> >
> > Then post here the content of register.pkt; but please, after issuing the
> > change explained above!
> >
> > Regards!
> >
> > 2010/9/28 Ron<nha...@gmail.com>
> >
> >> Hi All.
> >>
> >> got this problem that IP phones could not re-register to my server. even
> >> if device is power cycled it still would not register. the solution i
> >> found was to change the SIP port settings on the phone and it will
> >> register. but after registration expires and its time to re-register the
> >> same thing will happen, so i have to update the port settings again just
> >> to make it work which is troublesome.
> >>
> >> i'm using Asterisk 1.4.31 with the following realtime config:
> >>
> >> rtcachefriends=yes
> >> rtsavesysname=yes
> >> rtupdate=yes
> >> rtautoclear=no
> >>
> >> one thing i noticed is that it only seems to happen on linksys devices
> >> e.g. PAP2 and SPA's. another phone i'm using is yealink and so far no
> >> client has complain about it.
> >>
> >> hope anyone can help. thank you.
> >>
> >> regards
> >> Ron
> >>
> >>
> >> --
> >> _____________________________________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >> New to Asterisk? Join us for a live introductory webinar every Thurs:
> >>                http://www.asterisk.org/hello
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to