-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Songtao Yu
Sent: 29 September 2010 10:56
To: [email protected]
Subject: [asterisk-users] DAHDI FXO port only recognizes the "S"
extension?
Hi All,
When I tried to write my dial plan as below for my FXO port, which
connects one PSTN line:
[from-pstn]
exten =>s,1,Answer()
exten =>s,n,Wait(1)
exten =>_X.,1,Dial(DAHDI/1)
exten =>_X.,n,Hangup
I got the following message:
Connected to Asterisk 1.6.2.13 currently running on fax (pid = 8154)
Verbosity was 0 and is now 4
-- Starting simple switch on 'DAHDI/1-1'
-- Executing [...@from-pstn:1] Answer("DAHDI/1-1", "") in new stack
-- Executing [...@from-pstn:2] Wait("DAHDI/1-1", "1") in new stack
-- Auto fallthrough, channel 'DAHDI/1-1' status is 'UNKNOWN'
-- Hungup 'DAHDI/1-1'
But if I changed the "_X." to "S" extension, I can get the whole thing
to work well:
[from-pstn]
exten =>s,1,Answer()
exten =>s,n,Wait(1)
exten =>s,n,Dial(DAHDI/3)
exten =>s,n,Hangup
Would you please let me which casuses this issue?
Thanks,
Songtao Yu
<snip>
<reply 1>
>-----Original Message-----
>From: [email protected]
[mailto:asterisk-users->[email protected]] On Behalf Of Andrew Thomas
>Sent: Wednesday, September 29, 2010 10:59 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] DAHDI FXO port only recognizes the
"S"extension?
>The cause is bad programming. You can't go from an 's' to an '_X.' the
way you tried.
>exten =>s,1,Answer()
>exten =>s,n,Wait(1)
>exten =>s,n,Dial(DAHDI/3)
>exten =>s,n,Hangup
>Is correct (that's why it works).
>What is it you are trying to achieve?
** Thank (NOT GOD) for Microsoft Outlook **
To (hopefully) illuminate, the two "s" lines in post 1 are "path 1" that is
followed by everything that hits this context; the two _X. lines would only
be executed if the context were hit with a number. As "I" read this code,
it looks like OP wants to answer one line and open a "manual dial" on the
other. If I ran this in my shop (second "correct" post), assuming I wasn't
calling in on DAHDI/3, Asterisk would open the line, wait 1 second, then
give me a dial tone to make a new call using DAHDI/3. When I finished the
call, * would hang up.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
