Hello,
We are having issues with a NEW Sangoma A108D:
-- Executing [691918...@pbx1:1] Dial("SIP/xtravoip200-009d24b0",
"DAHDI/g0/691918892|30|m") in new stack
[Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator
path exists for channel type DAHDI (native 76) to 256
[Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to
create channel of type 'DAHDI' (cause 58 - Bearer capability not available)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [691918...@pbx1:2] Hangup("SIP/xtravoip200-009d24b0", "")
in new stack
== Spawn extension (pbx1, 691918892, 2) exited non-zero on
'SIP/xtravoip200-009d24b0'
wanrouter status:
wanrouter status
Devices currently active:
wanpipe1 wanpipe2 wanpipe3 wanpipe4 wanpipe5 wanpipe6 wanpipe7 wanpipe8
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud
rate |
wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe3 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe4 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe5 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe6 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe7 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe8 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | AFT TE1 | N/A | Connected |
wanpipe2 | AFT TE1 | N/A | Disconnected |
wanpipe3 | AFT TE1 | N/A | Disconnected |
wanpipe4 | AFT TE1 | N/A | Disconnected |
wanpipe5 | AFT TE1 | N/A | Disconnected |
wanpipe6 | AFT TE1 | N/A | Disconnected |
wanpipe7 | AFT TE1 | N/A | Disconnected |
wanpipe8 | AFT TE1 | N/A | Disconnected |
r...@sangoma-testing:/etc/asterisk# wanpipemon -i w1g1 -c Ta
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: OFF
RED: OFF | AIS: OFF
OOF: OFF | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: OFF
Open Circuit: OFF
Loss of Signal: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 187
Far End Block Errors : 0
CRC4 Errors : 0
FAS Errors : 0
Rx Level : > -2.5db
r...@sangoma-testing:/etc/asterisk# asterisk -rx 'pri show spans'
PRI span 1/0: Provisioned, Up, Active
PRI span 2/0: Provisioned, In Alarm, Down, Active
PRI span 3/0: Provisioned, In Alarm, Down, Active
PRI span 4/0: Provisioned, In Alarm, Down, Active
PRI span 5/0: Provisioned, In Alarm, Down, Active
PRI span 6/0: Provisioned, In Alarm, Down, Active
PRI span 7/0: Provisioned, In Alarm, Down, Active
PRI span 8/0: Provisioned, In Alarm, Down, Active
What's happening?
Hope you can help me
Regards!
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
