Thanks Gopalakrishnan ,Sebastian,Josef, Actually My Requirement is :
I need a international number all network should be able to connect to it. After ringing a ring call should be picked up. and should ask for a code. code should come from mysql or any other DB depending upon the code it should route the call to an application where it converts SIP to my protocol and vica versa. I am confused about the implementation. design is clear , Your help would be really helpful. On Sun, Oct 17, 2010 at 12:08 AM, Sebastian <[email protected]> wrote: > > > On 10/14/2010 03:09 PM, Gopalakrishnan A.N wrote: > > Hi Joshi, > > > > To connect with PSTN line you need FXO / FXS card. FXO is used to > > connect CO line and FXS is used to connect internal station line. With > > help of FXO you can connect the outside world and with help of FXS you > > can connect normal analog phones. Inspite of normal analog phones you > > can connect SIP phones (soft phones) also. > > Actually to connect PSTN lines (regular telephone lines coming from your > telecom provider) to Asterisk you only need FXO cards. Or ATA's > (analogue telephone adapters) - specially if your Asterisk box doesn't > have PCI or PCI-e slots. The FXO cards can be PCI or PCI-express (or > other flavours for more complex setups) with 1-8 (or even more) > connectors per card for the same number of telephone lines to be > connected to Asterisk. Digium, Sangoma, OpenVox and others make them. > > You only need FXS cards if you have analogue phones which you want to > re-use. Otherwise there are many manufacturers of SIP hardware phones - > looking perfectly similar to regular business desk phones - so there > isn't much point IMO to buy FSX cards unless you already have the > analogue phones and need to re-use them. > > Sebastian > > > Some vendors are there for > > these PSTN cards like Digium, Sangoma, Openvox. > > > > Good luck....:) > > > > > > > > On Thu, Oct 14, 2010 at 7:05 PM, Jigar Joshi <[email protected] > > <mailto:[email protected]>> wrote: > > > > Hello community, > > > > I have successfully set up asterisk free PBX server and I am also > > able to connect to it by softphone. > > > > Now as next step I want to extend this to PSTN , > > > > My Required scenario: > > > > I need a number which will connect outside PSTN world to my PBX and > > by applying extension particular softphone or connected normal phone > > should get connected. > > > > Which hardware I need for it. > > Also please explain a bit of dial plans. > > > > Thanks > > > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > > New to Asterisk? Join us for a live introductory webinar every Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > -- > > Thank you with regards, > > Gopalakrishnan A.N, > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
