Paul, Further to my last, I think I found another small related issue with IAX which is generating the following error: [Oct 24 14:42:12] ERROR[15589]: netsock2.c:94 ast_sockaddr_stringify_fmt: getnameinfo(): ai_family not supported To reproduce this issue, setup a phone in iax.conf or your realtime table, goto Zoiper press register in the Preferences / IAX Account. The phone will register correctly when your patch is applied. Then press unregister in Zoiper. On my realtime peers the error then shows up on the console, but for my static iax.conf peers it does not. If you then do a "iax2 show peers" on the console, the error is displayed. Notice that the value for "Host" in the command output is a empty string (example below). Name/Username Host Mask Port Status 111 (D) 255.255.255.255 0 Unmonitored
Initially (for static iax.conf peers) before registration this value is null and does not cause the error to be displayed on a "iax2 show peers" command (example below). So I'm guessing that somewhere on un-registration this is set to "" when it should be set to null. Name/Username Host Mask Port Status 111 (null) (D) 255.255.255.255 0 Unmonitored Thanks, Nic. -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Nic Colledge Sent: 24 October 2010 14:31 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk 1.8 IAX Registration Paul, I applied your patch to 1.8.0 and I'm happy to report it has fixed the problem I was experiencing. Thanks again. Nic. -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Paul Belanger Sent: 23 October 2010 22:06 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk 1.8 IAX Registration On Sat, Oct 23, 2010 at 3:03 PM, Paul Belanger <paul.belan...@polybeacon.com> wrote: > Okay, just reproduced your issue and looking at the code now. :) > Ok, think I fixed it. You can either apply this patch to 1.8.0, or svn update the branch I'm working on. Feedback is welcome. -- Paul Belanger | dCAP Polybeacon | Consultant Jabber: paul.belan...@polybeacon.com | IRC: pabelanger (Freenode) | Blog: http://blog.polybeacon.com | Twitter: http://twitter.com/pabelanger -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users