in the *short term* just add: noload => chan_iax.so
to your modules.conf Eventually we will move chan_iax2.c to chan_iax.c and chan_iax.c will become chan_iax1.c and will likely not be a default part of the build process. Mark On Sat, 31 Jan 2004, Vic Cross wrote: > G'day list, > > I am getting a lot[1] of traffic on my Internet link, ICMP messages from > 69.73.19.178 telling me UDP port 5036 is unreachable (this IP address > belongs to iaxtel.org). > > I see from the wiki that IAXtel supports only IAX2 from December 2003. > Fine, however it looks like my * still wants to try and register using > IAX1, and I can't find how to turn this off. > > This situation is confirmed in the response from "iax show registry" and > "iax2 show registry": > > enterprise*CLI> iax show registry > Host Username Perceived Refresh State > 69.73.19.178:5036 ##myid## <Unregistered> 60 Request Sent > enterprise*CLI> iax2 show registry > Host Username Perceived Refresh State > 69.73.19.178:4569 ##myid## ##myIP##:4569 60 Registered > > Can I shut off these attempts to register using IAX1 (please forgive me if > it's obvious, but I've been through the wiki and the Handbook)? > > Cheers, > Vic Cross > > [1] Okay, so it's not actually a lot of data, but it's four > request/responses every ten seconds, non-stop... > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
