Le 26/10/2010 14:49, Shaun Ruffell a écrit : > On 10/26/2010 06:38 AM, Administrator TOOTAI wrote: > >> I installed 2 HB8 cards each of them with a Quad Bri modules in a HP 360 >> G6 running Debian Squeeze. Here is an output of dmesg wafter server has >> booted: >> [...] >> >> before asking RMA for the card, I would like to know what you think >> about this matter. >> >> > First, Digium technical support would be more than happy I'm sure to > help you trouble shoot this. That being said... > > First thing I would do is update to the current trunk of dahdi-linux. > Revision 9397 [1] > http://svn.asterisk.org/view/dahdi?view=revision&revision=9397 was added > because of some systems that did not provide reliable polling from the > board side, which could result in erroneous "your firmware may be > corrupted..." messages. However, since you have one card that works and > one that doesn't I give this a low probability of fixing it. > Didn't test this yet but > Next, if updating the driver does not help and if the problem follows > the card (i.e., you can swap cards and now the second card fails to > load), switching cards gives kernel panic :-( on boot > I would disable dahdi from starting automatically, power off your > system, remove the working card, power on, and try "modprobe wctdm24xxp > forceload=1" on the chance that the firmware on the board actually is > corrupted. > Will try card by card, then slot per slot
Thanks for your help -- Daniel -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
