On Wed, Oct 27, 2010 at 05:37:15PM -0500, Don Kelly wrote:
> I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX
> 2.8.0.2.
>
>
>
> We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we
> had it working for a while with one NT PRI and one TE PRI and, in the
> process of trying to configure another PRI, I ran into a couple problems.
>
>
>
> (1) As my configuration changes didn't seem to affect the Astribank, I
> power-cycled it. I found that it doesn't reload firmware automatically when
> it's connected. I can force it to load, but am missing something to reload
> automatically.
What's the output of:
dahdi_hardware -v
lsdahdi
Do you have fxload installed?
>
>
>
> (2) I would appreciate a step-by-step suggestion of how I can make
> configuration changes that propagate properly to the Astribank.
>
>
>
> (3) I'd like to know if it's possible to determine what configuration has
> been loaded into the Astribank without visiting the site and looking at the
> lights.
There's practically no configuration in the Astribank itself. There is
firmware that gets loaded to it at startup, as it is not saved on the
Astribank itself. But the configuration is on your system.
--
Tzafrir Cohen
icq#16849755 jabber:[email protected]
+972-50-7952406 mailto:[email protected]
http://www.xorcom.com iax:[email protected]/tzafrir
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
