Yes. Adtran FXS cards.
Did you say you were using Adtran FXS cards? Bisker, Scott (7805) wrote: > Hello All, > > I've mostly solved my DID problem from a few days ago. Apparenly the lines weren't > configured properly. Now heres the next question. 12 E&M wink lines from telco. I > have them all plugging into an Adtran 750 with FXS cards. The Adtran ports are > configured DPO. How do I signal this from Zaptel. I have them setup E&M in > zaptel.conf and EM_W in zapata.conf. They work, however, no DNIS info is being > passed. Do I need to signal these something different like loopstart or kewlstart, > so the DNIS info gets passed? I watch the Tx/Rx bits from zttool, and everything > looks okay coming from the Adtran. It looks like asterisk isn't winking properly. > > When I had the lines misconfigured for fxs_ls the DNIS info was passing fine. > > I'm running > zaptel-0.8.0 > libpri-0.5.1 > And asterisk CVS from 12/23/2003 > RedHat 8.0 > Dual 2.4 Xeon Processors (hyperthreading disabled) > 2Gig Memory > > Any help would be greatly appreciated. > > Regards, > > -sb > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users