On 11/10/2010 09:31 AM, Martin Spinassi wrote: > On Wed, 2010-11-10 at 17:10 +0200, Tzafrir Cohen wrote: >> On Wed, Nov 10, 2010 at 11:42:18AM -0300, Martin Spinassi wrote: >>> Hi list, >>> >>> I'm trying to setup an asterisk 1.8.0 with MFC/R2, but I'm having these >>> error messages loading chan_dahdi: >>> >>>> module load chan_dahdi.so >>> ERROR[9241]: chan_dahdi.c:11848 mkintf: Signalling requested on channel >>> 1 is MFC/R2 but line is in ISDN PRI signalling >> >> That is: "You requested [in chan_dahdi.conf] MFC/R2 signalling, but the >> channel has [applied from /etc/dahdi/system.conf] PRI signalling. >> >> You should probably have in /etc/dahdi/system.conf something along the >> lines of: >> >> # Not sure about crc4 >> span=1,1,0,cas,hdb3,crc4 >> cas=1-15,17-31,1101 >> dchan=16 >> >> # also be sure to set echocan, tonezone, and such >> > > > Thank you so much Tzafrir for your response. > > After reading your post, it gets a bit more clearer, but can't figure > out how to solve it. > > This is my /etc/dahdi/system.con
Hi Martin, I think you should change the following: > > span = 1,1,0,ccs,hdb3 > bchan = 1-15,17-31 > dchan = 16 > echocanceller = mg2,1-240 > loadzone = ar > defaultzone = ar To this: span = 1,1,0,cas,hdb3 cas = 1-15,17-31:1101 echocanceller = mg2,1-240 loadzone = ar defaultzone = ar Then restart dahdi. Cheers, Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users