On 12/01/2010 09:56 AM, Olivier wrote: > I'm facing an issue with which loading wctdm24xxp module fails. > > Here is relevant dmesg's output :
> [ 33.527942] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. > [ 33.527995] wctdm24xxp 0000:01:0b.0: The firmware may be corrupted. > Please completely power off your system, power on, and then reload th > e driver with the 'forceload' module parameter set to 1 to attempt recovery. > [ 33.544741] ACPI: PCI interrupt for device 0000:01:0b.0 disabled > [ 33.544757] wctdm24xxp: probe of 0000:01:0b.0 failed with error -5 The essential thing here is that your Hx8 board doesn't appear to be responding. I've seen certain systems where revision 9397 [1] works around cases like what you're seeing. If that doesn't help your best bet is to contact Digium technical support for help with troubleshooting. [1] http://svn.asterisk.org/view/dahdi?view=revision&revision=9397 > > To narrow my research scope, I'm wondering if the followin sentence is > true : > "if you load a dahdi module with a modprobe command (like modprobe > wctdm24xxp) disconnect any cable of any kind connected to the > corresponding PCI board, should this command succeed or fail" > > In other words, do you need to connect board to a public network when > configuring it ? > No, the current alarm state of any ports doesn't matter when you configure the board. The configuration of modules on a given Hx8 basecard will not affect whether the driver is able to load or not. Cheers, Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
