2010/12/5 Administrator TOOTAI <ad...@tootai.net> > Hi, > > I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines > (mISDN) connected on it, everything runs fine. > > I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1 > module of 4 lines. Already had with this machine an RMA on both cards as > they was faulty and crashed the server. > > What happends is that when I connect cables on the HA8 modules (those > cables are unpluged from working server and connected to the new one) > nothing happend on the dahdi status, alarm is RED. Two days ago one > cable changed his staus to YELLOW (?) and then became again RED. > > Below are relevant outputs. I created those config files with one of the > previous card which worked a short time and it was OK. > > Could it be possible that modules have also to go for RMA? > > Thanks for any hint. > > SrvPhone2:/etc/asterisk# cat chan_dahdi.conf > ; > ; DAHDI telephony interface > ; > ; Configuration file > ; > ; You need to restart Asterisk to re-configure the DAHDI channels > ; CLI> reload chan_dahdi.so > ; will reload the configuration file, > ; but not all configuration options are > ; re-configured during a reload. > > > > [channels] > ; > ; Default language > ; > language=fr > ; > ; Default context > ; > context=isdn > internationalprefix = 00 > nationalprefix = 0 > usecallerid=yes > hidecallerid=no > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > switchtype=euroisdn > > ; > ; Allow call parking > ; ('canpark=no' is overridden by 'transfer=yes') > ; > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > ; > ; If you are having trouble with DTMF detection, you can relax the DTMF > ; detection parameters. Relaxing them may make the DTMF detector more > likely > ; to have "talkoff" where DTMF is detected when it shouldn't be. > ; > ;relaxdtmf=yes > ; > ; You may also set the default receive and transmit gains (in dB) > ; > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > immediate=no > ; This feature can also easily detect false hangups. The symptoms of this > is > ; being disconnected in the middle of a call for no reason. > ; > callprogress=yes > progzone=be > > ; For fax detection, uncomment one of the following lines. The default > is *OFF* > ; We use NVFaxDetect stuff for this > ; > ;faxdetect=both > ;faxdetect=incoming > ;faxdetect=outgoing > ;faxdetect=no > > group=1 > signalling=bri_cpe > context=isdn > channel => 1,2,4,5,7,8,10,11,13,14,16,17,19,20,22,23 > > > > > > SrvPhone2:/etc/dahdi# cat system.conf > loadzone = be > defaultzone = be > > span = 1,1,0,ccs,ami > bchan = 1,2 > hardhdlc = 3 > > span = 2,2,0,ccs,ami > bchan = 4,5 > hardhdlc = 6 > > span = 3,3,0,ccs,ami > bchan = 7,8 > hardhdlc = 9 > > span = 4,4,0,ccs,ami > bchan = 10,11 > hardhdlc = 12 > > span = 5,5,0,ccs,ami > bchan = 13,14 > hardhdlc=15 > > span = 6,6,0,ccs,ami > bchan = 16,17 > hardhdlc = 18 > > span = 7,7,0,ccs,ami > bchan = 19,20 > hardhdlc = 21 > > span = 8,8,0,ccs,ami > bchan = 22,23 > hardhdlc = 24 > > > > SrvPhone2*CLI> dahdi show status > Description Alarms IRQ bpviol CRC4 > Fra Codi Options LBO > HB8-0000 Board 1 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 1 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 1 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 1 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 2 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 2 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 2 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > HB8-0000 Board 2 RED 0 0 0 > CCS AMI 0 db (CSU)/0-133 feet (DSX-1) > > -- > Daniel > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Which Dahdi version ? I had to use latest trunk to have mine working.
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users