On Sat, Dec 11, 2010 at 3:06 AM, Bruce B <bruceb...@gmail.com> wrote: > Hi Everyone, > I am using pfSense to do firewall and NAT on an Asterisk server. I have > ports 5060 TCP/UDP and 10k-20k UDP forwarded to the Asterisk server local IP > 192.168.5.5. However, when a user from outside using Linksys WRP400 ata > connects to the Asterisk server and registers I see them as 192.168.1.1 in > the "sip show peers" command. In face, all many different of the Linksys > WRP400 show the same. It seems that pfsense does something to the packets > that when they reach Asterisk it thinks they are sent from the Gateway > rather than the actual endpoint hence the calls are not reaching the other > side but registration is made. > Any experience with this? > Thanks
Do you have the siproxd package installed on pfsense? It is suspossed to handle registrations from multiple phones behind NAT. In your case since the phones are external I would probably remove it if installed. I haven't needed siproxd. Also on Asterisk set externip to your static IP in sip.conf. Or if you don't have a static IP set externhost. You also need to configure localnet. Ryan -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
