On Sat, 31 Jan 2004, Tomica Crnek waxed:
> Hi everyone!
>
> Here is my configuration and messages taken from Asterisk startup. The E1 PRI trunk
> is connected to our national telecom company here in Croatia. When I call from
> outside over this trunk to my company I get 'error in connection' respnse. In the
> same moment I can't see anything in Asterisk, nothing that will tell me that the
> call reached Asterisk. I think there is a problem with PRI synchronization or PRI to
> zap communication.
>
> The card I am using is TE410P, the first port is the one that I use.
>
> /etc/zaptel.conf
> -----------------
> # port 1: trunk to telecom
> span=1,0,0,ccs,hdb3
Try this instead:
span=1,1,0,ccs,hdb3
(Note the second 1, that sets your timing to the telecom.)
--Chris
--
Chris Maj <cmaj_hat_freedomcorpse_hot_info>
Pronunciation Guide: Maj == May
Fingerprint: 43D6 799C F6CF F920 6623 DC85 C8A3 CFFE F0DE C146
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
