Magnus,
I finally got to testing the patch myself. Apparently it did not
work for me. That means that if you are affected by the same issue
it is not fixed yet. The current manifestation an incoming OOH_323
call fails in 30 seconds.
After reading your initial message more carefully I realized the
problem you experience must be different as the ooh_323 issue
affects all releases in 1.8 branch and you state that it worked for
you when you built from the svn trunk.
I would suggest you analyze the "full" log and make sure the fax
application does not complain of any problems, then check the
"h323_log" and make sure there are no complaints of codecs
incompatibility. If you are not utilizing T.38 then only alaw and
ulaw will support fax.
-Vladimir
On 1/14/2011 12:32 AM, [email protected] wrote:
Did apply the patch and did a recompile, no difference,
fax still not working.  But I did notice one thing, when I was standing at a fax
attched to PSTN and trying to send a fax to a fax attached
to the Asterisk:
The PSTN fax never switched to saying “Sending...” in the
display just “Dialing”, but I can “hear” the Asterisk fax i
answering.
When I went back to Trunk version and did the same, I saw
the fax display going from “Dialing” to “Sending” to
“Sending OK”.
I am sorry to say that I am not smart enough to know what
trace I should start looking at, any knows?
Sent: Thursday, January 13, 2011 5:04 PM
Subject: Re: [asterisk-users] Fax stopped
working when upgrading to 1.8.2
Magnus,
Can it be the same as I experienced https://issues.asterisk.org/view.php?id=18542
? Do not be confused by the ticket subject, it reflects the
symptoms as they looked originally....
You can try the patch if applicable and if you know how to
compile Addons in 1.8 separately or if you have a capacity
to compile the whole thing.
-Vladimir
On 1/13/2011 6:31 AM, [email protected]
wrote:
Gentlemen,
We have a setup as below:
PSTN – E1 – Avaya – OOH323 trunk – Asterisk –
SPA-2102 – Fax machine
Running Asterisk SVN-trunk-r280589M, fax working
as a clock.
I decided to leave “trunk” and go a stable
version so I upgraded to 1.8.2.
Didn’t change any config files, everything worked
as before except fax.
I wonder if there are any known issues or things
that I have missed to do in some config file.
Did a downgrade to SVN-trunk-r280589M and fax
started to work again.
/Magnus
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
