|
Hi there,
Besides the problem of Voicetronix dialing too
early before the carrier gives a dial tone, there also appears to be issues with
the audio quality when more than 1 channel is utilized.
From an experiment, whenever 1 channel is
occupied (i.e. outbound call in progress) then getting a dial tone on an
available channel will take sometime. What this means is, once you get a
dial tone after pressing 9, the channel is bridged with the SIP phone, then you
wait about 4 to 5 seconds and you will hear a dial tone from the carrier.
The dial tone is very choppy and most of the time we can't even dial out because
the quality is so bad that the DTMF is not sent out at all.
It is definitely not the individual line as this
scenerio can happen at any channel.
Anybody had similiar problems?
David
|
