Hello. I have been working on getting my asterisk box to connect to a lucent definity PBX using a T100p. I connected it to a t1 port on the lucent box and ran a T1 crossover cable to the t100p. I have asterisk setup with a voicepulse account for outbound and inbound dialing. On the lucent pbx I matched the configs of a working channelized MCI t1. The only thing asterisk is doing is acting as a voip gateway. Everything works ok with only one issue. When someone makes a call outbound and hesitates on dialing the numbers, asterisk only picks up a partial number. It doesn't wait until the person dialing finished dialing the full number. If the person dials the number without any delay the call goes through. On the asterisk console I see the partial phone numbers when this happens.
How does this type of setup work. Is this a lucent issue or an asterisk issue. Does the lucent pbx just open a channel, send digits and them the asterisk box has dialplan time out or is the lucent pbx to wait until it sees all the numbers before sending it to the asterisk box. Any help will be appreciated. Thanks John Bittner Zapata.conf [channels] ; ; T100P plugged into Lucent Definity ; context=voicepulse-outgoing signalling=em_w group=1 channel =>1-24 rxwink=300 usecallerid=yes callwaiting=yes echocancel=yes rxgain=0.0 txgain=0.0 immediate=no callerid=asreceived _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
