Thanks for the insight will try that one. Is there any suggested value for this parameter that best work well on fax?
Regards, Mac > >From: Moises Silva <[email protected]> >To: Asterisk Users Mailing List - Non-Commercial Discussion ><[email protected]> >Sent: Saturday, February 19, 2011 10:05:45 PM >Subject: Re: [asterisk-users] FAX on PRI to MFCR2 > > >On Fri, Feb 18, 2011 at 3:23 AM, leonimar cape <[email protected]> wrote: > >Hi, >> >>I am having issues sending and receiving fax on my asterisk setup. >> >>Currently I have a server that has 2 x E1 TDM cards one is sangoma and the >other >> >>one is openvox. Both support echo cancellation. >> >>One of the e1 is connected to our telco provider via mfcr2 where all our >>incoming calls originate. On the other end is a pri connection going to HICOM >>PABX where the local attached to a fax is connected. Fax passing thru this >>connection are not getting thru and always getting drop. >> >>FYI: all of the 8xE1s are currently up with two using mfcr2 and the rest is >ISDN >> >>pri. >> My guess is that using 2 different cards from 2 different manufacturers for FAX (which is sensitive to time slips) is probably a bad idea because most likely is not possible to synchronize their clocks. If you were using 2 Sangoma ports you can sync the ports with the TE_REF_CLOCK parameter. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. [email protected]
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
