Your message was: ---------------------------------------------------- Here you go:
/etc/zaptel.conf: loadzone = us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,1,0,esf,b8zs bchan=25-47 dchan=48 #Added 2nd 2xT1 card span=3,0,0,d4,ami e&m=49-72 span=4,0,0,d4,ami fxoks=73-96 --------------------------------------------- mmmmm, I would change the timing sources of the spans: span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs Have you try to plug the PRI into another Span that has been working properly?? Regards. Juan. Linux User #441131 On Mon, Feb 21, 2011 at 2:23 PM, Dean Hoover <[email protected]> wrote: > This doesn't represent the 2nd span? > > span=2,1,0,esf,b8zs > bchan=25-47 > dchan=48 > > Dean > > > On Mon, Feb 21, 2011 at 1:18 PM, Juan David Diaz <[email protected]> > wrote: > > I don't see any problem...... but, i don't see the 2nd SPAN @ zaptel: > > yellow alarm on span 2 > > > > regards. > > > > > > Juan. > > Linux User #441131 > > > > > > On Mon, Feb 21, 2011 at 2:11 PM, Dean Hoover <[email protected]> wrote: > >> > >> Here you go: > >> > >> /etc/zaptel.conf: > >> loadzone = us > >> defaultzone=us > >> > >> span=1,0,0,esf,b8zs > >> bchan=1-23 > >> dchan=24 > >> span=2,1,0,esf,b8zs > >> bchan=25-47 > >> dchan=48 > >> > >> #Added 2nd 2xT1 card > >> span=3,0,0,d4,ami > >> e&m=49-72 > >> span=4,0,0,d4,ami > >> fxoks=73-96 > >> > >> --------------------------------------- > >> > >> /etc/asterisk/zapata.conf: > >> [channels] > >> group=1 > >> context=default > >> signalling=pri_cpe > >> switchtype=qsig > >> channel=>1-23 > >> > >> group=2 > >> context=twtelecom-in > >> signalling=pri_cpe > >> switchtype=5ess > >> echocancel=yes > >> channel=>25-47 > >> > >> group=3 > >> context=definity-in > >> signalling=em_w > >> channel=>49-72 > >> > >> group=10 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>73 > >> > >> group=11 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>74 > >> > >> group=12 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>75 > >> > >> group=13 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>76 > >> > >> group=14 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>77 > >> > >> group=15 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>78 > >> > >> group=16 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>79 > >> > >> group=17 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>80 > >> > >> group=18 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>81 > >> > >> group=19 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>82 > >> > >> group=20 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>83 > >> > >> group=21 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>84 > >> > >> group=22 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>85 > >> > >> group=23 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>86 > >> > >> group=24 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>87 > >> > >> group=25 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>88 > >> > >> group=26 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>89 > >> > >> group=27 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>90 > >> > >> group=28 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>91 > >> > >> group=29 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>92 > >> > >> group=30 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>93 > >> > >> group=31 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>94 > >> > >> group=32 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>95 > >> > >> group=33 > >> context=testivr-in > >> signalling=fxo_ks > >> threewaycalling=yes > >> transfer=yes > >> channel=>96 > >> > >> --------------------------- > >> > >> On Mon, Feb 21, 2011 at 12:58 PM, Juan David Diaz <[email protected]> > >> wrote: > >> > Dean, > >> > what's your zaptel & Zapata config_ > >> > regards > >> > Juan. > >> > Linux User #441131 > >> > > >> > > >> > On Mon, Feb 21, 2011 at 1:44 PM, Dean Hoover <[email protected]> > wrote: > >> >> > >> >> We are running Asterisk version 1.4.23-1, libpri-1.4.9 and > >> >> zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10. > >> >> > >> >> We have a T1 PRI connected to the telco. Over the last 4-5 days, we > >> >> have getting Yellow/Red alarms coming from the T1 PRI. The other two > >> >> ports in use are connected to internal test switches (Avaya > >> >> Legend/Avaya Definity), and are not showing any errors. > >> >> > >> >> /var/log/asterisk/messages reports: > >> >> [Feb 21 12:21:56] NOTICE[4795] chan_dahdi.c: PRI got event: Alarm (4) > >> >> on Primary D-channel of span 2 > >> >> [Feb 21 12:21:56] DEBUG[4795] chan_dahdi.c: Got event Alarm (4) on > >> >> D-channel for span 2 > >> >> > >> >> /var/log/syslog reports: > >> >> Feb 21 12:21:56 asterisk kernel: [509981.796536] wct2xxp: Setting > >> >> yellow alarm on span 2 > >> >> Feb 21 12:21:56 asterisk kernel: [509981.796562] timing source auto > >> >> card > >> >> 0! > >> >> Feb 21 12:21:56 asterisk kernel: [509981.813535] timing source auto > >> >> card > >> >> 0! > >> >> Feb 21 12:22:01 asterisk kernel: [509986.813869] wct2xxp: Clearing > >> >> yellow alarm on span 2 > >> >> > >> >> Intensive PRI debugging does not show any errors prior to the alarm. > >> >> > >> >> The other part to this is for a while it was pretty intermittent. > One > >> >> day we would get it 2 times, another 8-12 times. Today, however, it > >> >> seems to be happening around every 11-13 minutes. Before this > >> >> started, there were no errors for the 6 days prior. > >> >> > >> >> The first response from the telco 4 days ago said that it was an > issue > >> >> on their T3, then came back saying we were sending something to reset > >> >> the circuit, but I interpret "PRI got event" as meaning we received > >> >> something from them. > >> >> > >> >> They put a COM tracer in our building, on that circuit, since Friday > >> >> afternoon. They took it with them to examine the results this > >> >> morning, and are supposed to call me when they know something. > >> >> > >> >> While they are doing that, I want to make sure that I have all the > >> >> information I need in order to diagnose it. I haven't found a way to > >> >> trace the actual B8ZS/ESF frames, and was wondering if there was a > way > >> >> for me to log those events. It's not that I don't trust them, but by > >> >> the same token I haven't changed anything on my end, the other port > on > >> >> the Digium card isn't reporting an issue, and a complete shutdown of > >> >> the Asterisk server didn't change the results. > >> >> > >> >> Any advice would be greatly appreciated. > >> >> > >> >> Dean Hoover > >> >> Milwaukee, Wisconsin > >> >> > >> >> -- > >> >> _____________________________________________________________________ > >> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > >> >> New to Asterisk? Join us for a live introductory webinar every Thurs: > >> >> http://www.asterisk.org/hello > >> >> > >> >> asterisk-users mailing list > >> >> To UNSUBSCRIBE or update options visit: > >> >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > >> > > >> > -- > >> > _____________________________________________________________________ > >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > New to Asterisk? Join us for a live introductory webinar every Thurs: > >> > http://www.asterisk.org/hello > >> > > >> > asterisk-users mailing list > >> > To UNSUBSCRIBE or update options visit: > >> > http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > >> > >> -- > >> _____________________________________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> New to Asterisk? Join us for a live introductory webinar every Thurs: > >> http://www.asterisk.org/hello > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > -- > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > New to Asterisk? Join us for a live introductory webinar every Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
