On 2/21/11 4:52 PM, Gilles wrote:
Hello
On a brand new CentOS 5.5 host, I wanted to install Dahdi before
installing Asterisk 1.4.x.
So I untarred dahdi-linux-complete-2.4.0+2.4.0.tar.gz, followed by
make, make install, make config.
[snip]
Here's what "tail /var/log/messages" shows:
============
# tail /var/log/messages
...
Feb 21 22:44:54 centos kernel: fd != ff
Feb 21 22:44:54 centos kernel: fe != ff
Feb 21 22:44:54 centos kernel: Freshmaker failed register test
Feb 21 22:44:54 centos kernel: wctdm: probe of 0000:04:0a.0 failed
with error -5
============
Has someone seen this? Is my Dahdi configuration wrong, or is it some
issue between Dahdi and CentOS?
Thank your for any help.
I don't have much direct experience with the cards supported by the
wctdm driver, but based on what you show here, it appears more like
either a fundamental PCI bus incompatibility, the card isn't seated
properly in the slot, or failed hardware.
--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
