On 2/21/11 4:46 PM, C F wrote:
I just installed an FXS module onto a 4 channel tdm thats about 5
years old and it wont work. Running dmesg I can see the following
error:
Zapata Telephony Interface Registered on major 196
Freshmaker version: 71
Freshmaker passed register test
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Module 0: FAILED FXS (FCC)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules)
Does this have to do with the fact that the module is way newer than the card?
Not having much direct experience with the wctdm.c driver, that would be
my guess. You might be able to edit the wctdm_proslic_insane() function
to force the FLAG_3215 on for the card and see if that gives you a
different result.
--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
