Dan Iordanescu wrote: [snip] > 1. How do you switch the card from ISDN PRI TE to NT? This means from > being configured as User Equipment (the PABX) to be Network Equipment > (the Exchange).
This is done in the /etc/asterisk/zapata.conf file. > > 2. How do you configure the card for E1 or T1? This is done with jumpers on the card, per port. > 3. In case of ISDN PRI over T1 Does it work with Line Type: PRI, > channelised (23B + 1D) and CCS signalling? Where do you specify this > setting? > Yes, in /etc/zaptel.conf Mine looks like this: ;Incoming PRI span=1,1,0,esf,b8zs bchan=1-23 dchan=24 ;Incoming PRI1 span=2,2,0,esf,b8zs bchan=25-47 dchan=48 .......... > 4. Does it work with Trunk Type: TIE (incoming and outgoing calls)? > Where do you set it? > dunno. Never tried that. > 5. Where do you specify: Channel Type: voice-only > dunno what exactly you mean. Mine has voice-only... and I didn't set anything, so if that's what you mean... > Thank you very much, > Dan. Hope this helps, David Gomillion _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users