Hi Terry,
I did that, and did find a autoRingAnswer and Ringanswer modes that I tried to use, but somewhere I am missing something that breaks it. If ever you find what you did, I`d appreciate if you'd share with me. Mike From: [email protected] [mailto:[email protected]] On Behalf Of Terry Brummell Sent: Thursday, February 24, 2011 2:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Paging with Polycom 3.3.x If you compare a working config with a non-working you will see something with the answer type. I had that issue until I down rev'd. Look for something like "Ring Answer", I forget the exact details now. _____ From: [email protected] on behalf of Mike Sent: Thu 2/24/2011 1:41 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] Paging with Polycom 3.3.x Hi, My phones stopped auto-answering when being paged, since I moved on to Polycom firmware 3.3.0 (3.3.1 is the same, I tried). That is with Asterisk 1.6.2.16. I looked at the wiki but nothing I try there works, even if I cut and paste the same setup. Any one has any idea of what I should change from my old 3.2.3 setup? My older phone (501) still using 3.1.6 still auto-answer correctly. Regards, Mike
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
