Danny Nicholas <da...@debsinc.com> wrote: > > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of > cov...@ccs.covici.com > Sent: Tuesday, April 05, 2011 2:22 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] dahdi and linux-2.6.38 > > > Danny Nicholas <da...@debsinc.com> wrote: > > >> -----Original Message----- > >> From: asterisk-users-boun...@lists.digium.com > >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of > >> cov...@ccs.covici.com > >> Sent: Tuesday, April 05, 2011 1:53 PM > >> To: asterisk-users@lists.digium.com > >> Subject: [asterisk-users] dahdi and linux-2.6.38 > >> > >> Under linux-2.6.38 I was able to compile and install dahdi, however when > >> I ran dahdi_cfg -vv, I got an invalid argument on my fxs port. I have > >> an old 400P card with one FXS and one FXO module. I have > >> dahdi-trunk r9868 and dahdi-tools-trunk 8670. > >> > >> How can I get this to work correctly? > >> > >> Thanks in advance for any ideas. > > > < You installed libpri ? > >>I don't have any pri's. > > I'd check the dmesg output - AFAIK you need libpri as a backbone for DAHDI > (at least on some kernels).
No dmesg output at all. Just when the modules were loaded, but not from the dahdi_cfg -vv -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici cov...@ccs.covici.com -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users