On Fri, Apr 08, 2011 at 09:11:20AM +0000, salaheddine elharit wrote: > i have a question related to CRC, yesterday i had an issue in our span when > i verify with zttool i found recovering instead ok > > i verify the zaptel.conf and i found > > # Autogenerated by /usr/sbin/zapconf on Thu Apr 7 17:19:52 2011 -- do not > hand edit > # Zaptel Configuration File > # > # This file is parsed by the Zaptel Configurator, ztcfg > # > > # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS > span=1,1,0,ccs,hdb3,*crc4* > # termtype: te > bchan=1-15,17-31 > dchan=16 >
... > in the normal zaptel there is no *crc4 * i delete the CRC4 from the 2 spans > and all works perfectly. > > i want to know how the file was generated automatically with CRC4 and if > there is any way to disable this option I am not familiar with how the /usr/sbin/zapconf tools works, but with dahdi_genconf in DAHDI, E1 spans default to use CRC4. This covers the majority of users. I did not see any way in /etc/dahdi/genconf_parameters to control the output of the CRC4 line. My opinion is that you did exactly what you needed: run zapconf to get sensible defaults then edit the output file for your specific provider. Cheers, Shaun -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
