Asim Amin <asim <at> horizontech.biz> writes: > > > Hello All,Anyone who has experience using Digium analog card clones from any of the following:1. Zycoo2. CTVON3. Chinaroby4. Etross5. Immediate IT (IIT)6. Realtone > and can give review which one is good quality with easy configuration and error free running. Also since some of these manufacture only analog cards, does anyone have any experience using these in a single system with digital cards from other manufacturers like Openvox? -- Asim AminPartnerTechnical Manager, Telco DivisionHorizon TechnologiesCell: +92-323-3314151E-mail: asim <at> horizontech.bizWeb: http://horizontech.biz > http://hostht.com > > > -- > _____________________________________________________________________
I don’t have experience with the rest, except Chinaroby. I bought two cards, (TDM410P & TE405P) from eBay. I have both bad experience!! I run the latest dahdi 2.4.1 The LEDs on the TDM410P do not lite. Occasionally, the FXS ports will generate lots of noise. The FXS modules indeed feel very hot. It was a nightmare to install the TE405 as well. It was not recognized by Elastix 2.0 If I use Elastix 1.6, the ports appear. However, I cannot make outgoing calls. I finally downgrade to Elastix 1.5 on Dahdi 2.3. The outgoing/incoming calls work but there are some “clicking” noise in the first about 10s. My client eventually refuses to accept this system. I have to replace the card from another supplier. No more clicking noise. So far, it works well for the past 4 months. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
