You might consider getting a cable with male/female nine-pin D connectors. This will allow you to plug into the "Admin" port of the BCU and the serial port of your laptop. Run HyperTerminal at 9600 to talk with the Adtan. It's pretty explanatory.
You didn't say if your Adtran is new or used. I would certainly check the firmware revision--the current is L36 (I think). Previous versions didn't supervise call termination correctly.
Cheers, Mike
John Baker wrote:
Hello,
I gave up trying to get my Voicetronix 4-port FXO card working with Asterisk and opted for an Adtran 750 with three quad FXO cards going into a T100P.
My toy came in today and I'm wondering what to do next.
Basically, I'm trying to run 10 POTS lines into the Adtran and get output into the T100P. Clearly, I have very little idea of what I'm doing, so I thought I'd ask:
1) Do I need to do anything other than put the FXO cards in and figure out which lines are live on the 66 block? Or will I need to open up a console on the Adtran and fix up a few things?
2) If the latter, what needs to be set on the Adtran?
3) What are the settings for zaptel.conf and zapata.conf?
4) How will the caller-ID be signalled?
5) Does anybody need three quad FXS cards? The Adtran came with 6 quad FXS and I'm replacing three with FXO cards, so I won't need all of them. (I was just going to leave the other three in the Adtran)
6) On the other hand, should I take out all 6 FXS cards and just go with the three FXO or will it matter?
Thanks in advance,
John Baker List Brokers, Inc.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
