|
Hi, "pri show version" should show you something like that: libpri version: 1.4.11.4 loadzone should be "de". Better you configure your system with the help of "./Setup dahdi" (which can be found in your wanpipe-source-directory). Or after installation you can change config files (as root) with " wancfg_dahdi"
(should be found in /usr/sbin).Best regards, -Thorsten- Am 31.05.2011 00:29, schrieb bilal ghayyad: Hi All; >From the CLI, if I typed pri then I can find the command and the relative commands for it .. does this mean that the libpri is installed well? How can I be sure that Asterisk took the libpri and it is functioning?Now, regarding to the PRI configurations: The provider is using: ISDN PRI E1, hdb3 and they disable the CRC4 At the /etc/dahdi/system.conf I added the following: span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 I have a question, as I am using E1 so it is a wrong to use a loadzone us? Because us is using T1 and not E1? At the /etc/asterisk/chan_dahdi.conf I added the following: context=Incoming group=0 signaling=pri_net (and really I do not know if I have to use pri_cpe) switchtype=euroisdn channel=>1-15,17-31 Well, Do I miss any thing? What commands that can help me to know if I have hardware failure in the card, if the E1 is UP or not? Your kindly help is highly appreciated. Regards Bilal |
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
