Hi,
Nobody on this?
Le 16/05/2011 23:35, Administrator TOOTAI a écrit :
Le 16/05/2011 18:27, Jose P. Espinal a écrit :
Administrator TOOTAI wrote:
Of course it's 1.4.41. And the result is that devices doesn't
register anymore.
Thanks for any hint.
If you are installing from source, check out if some modules did not
load properly due to undefined symbols.
# asterisk -gvvvvvvvvvvvvvvvvvvc | tee output.txt
CLI> stop gracefully
Then review that output.txt file.
Don't think that the problem is here: the devices are working well
with previous version of asterisk on the same server. Also, other
devices from other manufacturer are still working ok.
Question is why auth is OK but registration failed? On 1.4.40 we juste
had to change the device local port (eg from 5061 to 5062) and
registration was OK. On 1.4.41 this trick is no more working. And
"stale nonce" should have an end of life in our mind, but doesn't.
Thanks for your tip.
--
Daniel
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
