The SV8100 can do either ground or loop
Assuming you can access the system it can easily be changed.
Programming manual here:
http://www.telecomcepts.com/downloads/SV8100/SV8100 Programming Manual_1.pdf
the original installer may have locked it down, but it CAN be changed.
John Novack
Robert Huddleston wrote:
Ya -- customer is on a nice NEC SV8100.. The card is a ground start
card.. they are currently being fed by a Cisco IAD2431 w/ RJ-21
punchdown cross-connect.
But that IAD2431 uses T1/E1 as WAN.. They are doing away with the T1
and want to use Ethernet for wan...
So IAD2431 would be great -- but if it only allows T1/E1 for WAN --
I'm shot.
*From:* John Novack [mailto:[email protected]]
*Sent:* Tuesday, June 14, 2011 3:47 PM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Cc:* Robert Huddleston
*Subject:* Re: [asterisk-users] Ground Start ATA / VOIP Gateway
Robert Huddleston wrote:
Anyone have recommendations for a gateway / ATA for business that can
do GroundStart? Preferably with an rj-21 -- but okay if not..
I don't know of any ATA that will do GS
An RJ-21 is the designation for a 66 block with 25 pair connector on
the side
GS is available with many channel banks though a T1 card and channel
bank might be overkill for your application.
Is this to go into a "legacy" switch?
Most have line cards that can be easily switched to Loop
Is this in the US, or ???
John Novack
--
Dog is my Co-pilot
--
Dog is my Co-pilot
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
