On 06/16/2011 07:58 AM, Mike Diehl wrote:
Well, I ran a simple test by trying to configure the second port to use the DNS
SRV record, as described below.
Here is what I have: (sanitized)
==========================================================
<Proxy_2_> diehlnet.com</Proxy_2_>
<Outbound_Proxy_2_> fqdn</Outbound_Proxy_2_>
<Display_Name_2_ ua="na">username</Display_Name_2_>
<User_ID_2_ ua="na">username</User_ID_2_>
<Password_2_ ua="na">password</Password_2_>
<Use_Auth_ID_2_ ua="na">Yes</Use_Auth_ID_2_>
<Auth_ID_2_ ua="na">username</Auth_ID_2_>
<Use_DNS_SRV_2_>yes</Use_DNS_SRV_2_>
==========================================================
With this configuration, the second port does NOT register. A sniffer trace on
the inside interface of my router gives me some clues, though:
23:54:34.906089 IP 10.0.1.87.60198> 208.67.222.222.53: 1+ A? diehlnet.com.
(30)
23:54:35.102409 IP 208.67.222.222.53> 10.0.1.87.60198: 1 1/0/0 A
173.10.242.193 (46)
23:54:35.104484 IP 10.0.1.87.5061> 173.10.242.193.5060: UDP, length: 527
23:54:35.104553 IP 173.10.242.193> 10.0.1.87: icmp 556: 173.10.242.193 udp
port 5060 unreachable
It seems that the device is still looking for an A record for diehlnet.com,
which does exist. It should be looking for the SRV record.
What am I missing?
Make sure you also have set:
<DNS_SRV_Auto_Prefix_2_ ua="na">Yes</DNS_SRV_Auto_Prefix_2_>
From the manual: "Enables the phone to automatically prepend the proxy
or outbound proxy name with _sip._udp when performing a
DNS SRV lookup on that name. Defaults to no."
Best regards,
Marius
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
