Latest firmware is on the card Sent from my android device.
-----Original Message----- From: Jim Dickenson <[email protected]> To: [email protected] Sent: Fri, 08 Jul 2011 5:59 PM Subject: Re: [asterisk-users] DTMF issues still I had a very strange problem with a Sangoma card that I had both Sangoma (about 3 hours) and Digium (about 2 hours) look at. When I got a different Sangoma tech to look at the problem it went away. I told the tech he did something and he said I alway verify the firmware on the card is updated and as it was not I updated it. That fixed the problem. This system had worked before a dahdi update was applied. Bottom line make sure you have the most current firmware for your card. -- Jim Dickenson mailto:[email protected] CfMC http://www.cfmc.com/ On Jul 8, 2011, at 2:49 PM, [email protected] wrote: I am still having major issues with dtmf recognition. My setup is Polycom end points. Tried this with different models, firmware and cfgs. Outbound calls are not going out reliably. Phones are set to rfc2833. I have had sangoma and elastix support look at it.. No better. Running asterisk 1.8.4. What am I missing? Any help appreciated.. Btw.. Used a basic test set and dialed out on all lines no problem. Sangoma card is a a400 with echo cancel. Sent from my android device. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
