On Fri, 2004-02-06 at 14:08, Brian West wrote: > Post your config and we can see whats up..
Incoming lines are via a FXO card in a CAC channel bank, although we had same issue with the lines connected to X100P cards. T1 Channels 1-12 are FXS to the handsets, 13-24 are FXO, only 13 - 16 are connected to POTS lines. ---zaptel.conf--- span=1,0,0,esf,b8zs fxoks=1-12 fxsls=13-24 loadzone=us defaultzone=us ---zaptel.conf--- ---zapata.conf--- ;Example user extension, all are identical adsi=yes echocancel=yes threewaycalling=yes transfer=yes signalling=fxo_ks context=local group=1 callerid="Internal Extension" <412> mailbox=12 channel=>12 ;Incoming POTS group=2 adsi=no echocancel=yes threewaycalling=yes transfer=no signalling=fxs_ls context=default rxgain=0 txgain=3 callerid="POTS 1" <345-xxx1> context=default channel=>13 callerid="POTS 2" <345-xxx2> context=default channel=>14 callerid="POTS 3" <345-xxx3> context=default channel=>15 callerid="POTS 4" <345-xxx4> context=default channel=>16 group=4 channel=>17-20 --extensions.conf-- [default] exten => s,1,Answer exten => s,2,DigitTimeout,15 exten => s,3,ResponseTimeout,30 exten => s,4,Wait(1) ; "Please enter extension, or if you do not know extension ; a directory will follow" exten => s,5,Background(ticom-intro) exten => s,6,Wait(3) exten => s,7,Background(user-1-name) exten => s,8,Background(user-2-name) exten => s,9,Background(user-3-name) exten => s,10,Background(user-4-name) exten => s,11,Background(user-5-name) exten => s,12,Background(user-6-name) exten => s,13,Background(user-7-name) ; Example user extension exten => 10,1,Dial(Zap/12,15,t) exten => 10,2,Voicemail2(u10) exten => 10,3,Hangup exten => 10,102,Voicemail2(b10) exten => 10,103,Hangup [local] ;everything else is pretty much straight from the demo --extensions.conf-- > On Fri, 6 Feb 2004, Mark Farver wrote: > > > We're still have problems with the outgoing voice message interfering > > with the touch tone detection. Often the first touch tone pressed will > > be detected twice. If I configure asterisk to not play the message, or > > if people wait till the outgoing message stops, it works flawlessly. > > > > I've noticed that many phone system silence the outgoing message once > > you start pressing buttons, is there anyway to configure asterisk to do > > the same? > > > > My C skills are non-existent, but the touch tone detection code in the > > zaptel libraries appears to work this way (apologies for basic like > > syntax): > > > > start: > > Wait for tone detected > > waiting: > > wait ~250ms > > still hearing tone? > > Yes, goto waiting > > No.. Add that tone to the queue, goto start > > > > In the above a short dropout that falls exactly on one of the 250ms > > checks would be detected as a break, even is it was only a few ms long. > > > > In my experience TT detection system work more like this, require a > > minimum length of silence/no Touch tone (100-250ms) before advancing to > > detecting the next number: > > > > start: > > wait for tone detected > > > > waiting: > > wait 250ms > > still hearing tone? > > Yes, goto waiting > > No.. > > wait 100-250ms, > > Still no tone? > > yes, add current tone to queue and goto start > > no, ignore silence, and goto waiting > > > > Thanks > > Mark Farver > > > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
