OK, I can buy echo canceller from Digium and how will be installed in the digium card? Or it is a hardware?
Currently I am reading a message at the consol that Unable to enable the echo canceller .. does this means that Digium card that I have is not supporting? This is the output of the dahdi_scan: [root@PBX-FF asterisk]# dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM2400P Board 1 name=WCTDM/0 manufacturer=Digium devicetype=Wildcard TDM2400P location=PCI Bus 16 Slot 05 basechan=1 totchans=24 irq=20 type=analog port=1,FXO port=2,FXO port=3,FXO port=4,FXO port=5,FXO port=6,FXO port=7,FXO port=8,FXO port=9,FXO port=10,FXO port=11,FXO port=12,FXO port=13,FXO port=14,FXO port=15,FXO port=16,FXO And thanks in advance for the help. Regards Bilal ------------- > > > To overcome the echo problem... > > Digium sells 'High Performance Echo Cancellation' > > http://www.digium.com/en/products/software/hpec.php > > Also, the 'Oslec Echo Canceller' > > http://www.rowetel.com/blog/?page_id=454 > > is supposed to be pretty good stuff. > > [un]Fortunately, I've never had the need to try either. > > -- -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users