I have the below in my sip.conf bindaddr = <PublicIP> tcpenable = yes tcpbindaddr = <PublicIP>
On Thu, 2011-08-25 at 17:22 +0300, Catalin S. wrote: > hello, > > > I tried still not working. :( something is wrong. > > On Thu, Aug 25, 2011 at 4:37 PM, Skyler <skchopper...@gmail.com> > wrote: > Hi, > > > On Thu, 2011-08-25 at 16:26 +0300, Catalin S. wrote: > > Hello, > > > > > > I need to listen on tcp 5060 on my actual asterisk 1.4.42. I > tried in > > sip.conf at > > [general] section the following options: > > > > > > transport=tcp > > tcpenable=yes > > tcpbindaddr=0.0.0.0 > > > > > > but after all that changes i still not see tcp port raised > up. Did > > somebody had the same problem and had some solutions? > > > > > > > Not 100% with 1.4 but with 1.6 you don't need to set > tcpbindaddr because tcpenable will listen on same IP as udp. > No transport either I believe. If you want, set udpbindaddr > and tcp will listen on this IP too. > > tcpenable=yes is all you should need. > > S. > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every > Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users