Hello all,
I have a system running AsteriskNOW with asterisk asterisk-1.8.8.1-1_centos5
from AsteriskNOW repository. I just changed our Polycom 335 sip.conf so that
blindpreferred=1 (all transfers default as blind transfers). If a customer
calls in & we answer & transfer, everything works fine. But if we call out to a
customer & then transfer to another internal extension, that extension quickly
rings & then the call is immediately gone & hung up. We are using Polycom
firmware 3.3.3.
In troubleshooting this & analyzing the asterisk logs (& asterisk SIP debug), I
am seeing a few interesting items. Any help would be appreciated.
For the sake of simplicity I am going to say that extension 20 is the original
internal extension & extension 21 is the extension we are trying to transfer
to. Here's what I've learned so far:
1. Asterisk SIP debugs are clearly showing that the transfer starts & SIP
INVITE is sent to ext 21. Ext 21 then sends a SIP message back to asterisk
indicating that it is ringing. Asterisk then sends a SIP CANCEL to ext 21. Call
is abruptly terminated for all parties.
2. Asterisk logs are displaying WARNING messages during the transfer
phase as:
WARNING[25423] chan_sip.c: Asked to transmit frame type slin, while native
formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
This error repeats 10-11 times quickly (within 1 second) prior to the SIP
CANCEL. (see sample of logs below)
3. Other interesting lines from the asterisk full log:
VERBOSE[25592] app_dial.c: -- Connected line update to
SIP/fpbx-1-b0c4ceff-00002104 prevented.
[Jan 5 20:51:30] VERBOSE[25592] app_dial.c: --
SIP/fpbx-1-b0c4ceff-00002104 requested special control 20, passing it to
SIP/21-00002105
[Jan 5 20:51:30] VERBOSE[25592] app_macro.c: == Spawn extension
(macro-dial-one, s, 42) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104' in
macro 'dial-one'
[Jan 5 20:51:30] VERBOSE[25592] app_macro.c: == Spawn extension
(macro-exten-vm, s, 14) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104' in
macro 'exten-vm'
4. In looking for the slin codec's use in our system, it is not permitted
in our system.
a. We use an upstream SIP trunk provider for PSTN connectivity. That
trunk's codes are configured as disallow=all followed by allow=ulaw&g729
b. Our normal sip.conf settings for all internal phones are: disallow=all
allow=g722 allow=ulaw allow=alaw allow=gsm
5. So it would seem that slin is not even in use on our system. So why
then does it seem like a sip device is asking to use slin? The only thing I can
find if I grep /var/log/asterisk/full for slin is:
[Jan 5 19:50:40] VERBOSE[24133] file.c: -- <SIP/fpbx-2-b0c4ceff-000020bf>
Playing '/var/spool/asterisk/voicemail/default/21/unavail.slin' (language 'en')
So it appears that our audio recordings for voicemail are in slin format?
I am not an expert with all of this, but I am doing my best to try to put the
pieces together. So again, just to recap, the problem I need to solve is why
are blind transfers calls getting terminated when the call being transferred
originated as an outbound call from one of our internal Polycom phones.
Any help would be GREATLY appreciated! :)
Just a greater excerpt from the logs:
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Goto (macro-dial-one,s,30)
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:30]
Set("SIP/fpbx-1-b0c4ceff-00002104", "D_OPTIONS=
tr") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:31]
ExecIf("SIP/fpbx-1-b0c4ceff-00002104", "0?SIPAd
dHeader(Alert-Info: )") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:32]
ExecIf("SIP/fpbx-1-b0c4ceff-00002104", "0?SIPAd
dHeader()") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:33]
ExecIf("SIP/fpbx-1-b0c4ceff-00002104", "0?Set(C
HANNEL(musicclass)=)") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:34]
GosubIf("SIP/fpbx-1-b0c4ceff-00002104", "0?qwai
t,1") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:35]
Set("SIP/fpbx-1-b0c4ceff-00002104", "__CWIGNORE
=") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:36]
Set("SIP/fpbx-1-b0c4ceff-00002104", "__KEEPCID=
TRUE") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:37]
GotoIf("SIP/fpbx-1-b0c4ceff-00002104", "0?usego
to,1") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:38]
GotoIf("SIP/fpbx-1-b0c4ceff-00002104", "0?godia
l") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:39]
Set("SIP/fpbx-1-b0c4ceff-00002104", "CONNECTEDL
INE(name,i)=Kyle") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:40]
Set("SIP/fpbx-1-b0c4ceff-00002104", "CONNECTEDL
INE(num)=21") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:41]
Set("SIP/fpbx-1-b0c4ceff-00002104", "D_OPTIONS=trI") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-dial-one:42]
Dial("SIP/fpbx-1-b0c4ceff-00002104", "SIP/21,15,trI") in new stack
[Jan 5 20:51:30] VERBOSE[25592] netsock2.c: == Using SIP RTP TOS bits 184
[Jan 5 20:51:30] VERBOSE[25592] netsock2.c: == Using SIP RTP CoS mark 5
[Jan 5 20:51:30] VERBOSE[25592] app_dial.c: -- Called SIP/21
[Jan 5 20:51:30] VERBOSE[25592] app_dial.c: -- Connected line update to
SIP/fpbx-1-b0c4ceff-00002104 prevented.
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] VERBOSE[25592] app_dial.c: -- SIP/21-00002105 is ringing
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] WARNING[25592] chan_sip.c: Asked to transmit frame type slin,
while native formats is 0x4 (ulaw) read/write = 0x4 (ulaw)/0x4 (ulaw)
[Jan 5 20:51:30] VERBOSE[25592] app_dial.c: --
SIP/fpbx-1-b0c4ceff-00002104 requested special control 20, passing it to
SIP/21-00002105
[Jan 5 20:51:30] VERBOSE[25592] app_macro.c: == Spawn extension
(macro-dial-one, s, 42) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104' in
macro 'dial-one'
[Jan 5 20:51:30] VERBOSE[25592] app_macro.c: == Spawn extension
(macro-exten-vm, s, 14) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104' in
macro 'exten-vm'
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: == Spawn extension
(from-internal-xfer, 21, 2) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104'
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing
[h@from-internal-xfer:1] Macro("SIP/fpbx-1-b0c4ceff-00002104", "hangupcall") in
new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-hangupcall:1]
GotoIf("SIP/fpbx-1-b0c4ceff-00002104", "1?theend") in new stack
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Goto (macro-hangupcall,s,3)
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: -- Executing [s@macro-hangupcall:3]
Hangup("SIP/fpbx-1-b0c4ceff-00002104", "") in new stack
[Jan 5 20:51:30] VERBOSE[25592] app_macro.c: == Spawn extension
(macro-hangupcall, s, 3) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104' in
macro 'hangupcall'
[Jan 5 20:51:30] VERBOSE[25592] pbx.c: == Spawn extension
(from-internal-xfer, h, 1) exited non-zero on 'SIP/fpbx-1-b0c4ceff-00002104'
Thanks,
-
Doug Mortensen
Network Consultant
Impala Networks Inc
CCNA, MCSA, Security+, A+
Linux+, Network+, Server+
A.A.S. Information Technology
.
www.impalanetworks.com<http://www.impalanetworks.com/>
P: (505) 327-7300
F: (505) 327-7545
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
