One thing i have noticed is that your profile-id don't match and therefore you would get no video. Asterisk is not a problem On Jan 9, 2012, at 1:20 AM, Durgesh Mishra wrote:
> Hi, > I am facing an issue while testing the video mail service of Asterisk. I have > two different setup on one setup client being used is Mercuro while on the > other client is Android based. > On the Mercuro setup video mail is stored and retrieved properly while with > Android based setup video mail is not stored (audio is through). > Both the client use H.264 codec with following sdp information: > > Android Based Client SDP Parameters > v=0 > o=- 1325786904 1325786904 IN IP4 172.16.130.47 > s=Polycom RealPresence > c=IN IP4 172.16.130.47 > b=AS:1920 > t=0 0 > a=sendrecv > m=audio 3230 RTP/AVP 118 115 114 113 0 8 119 > a=rtpmap:118 SIRENLPR/48000 > a=fmtp:118 bitrate=64000 > a=rtpmap:115 G7221/32000 > a=fmtp:115 bitrate=48000 > a=rtpmap:114 G7221/32000 > a=fmtp:114 bitrate=32000 > a=rtpmap:113 G7221/32000 > a=fmtp:113 bitrate=24000 > a=rtpmap:0 PCMU/8000 > a=rtpmap:8 PCMA/8000 > a=rtpmap:119 telephone-event/8000 > a=fmtp:119 0-15 > m=video 3232 RTP/AVP 109 110 > a=rtcp-fb:* ccm fir tmmbr > a=rtpmap:109 H264/90000 > a=fmtp:109 profile-level-id=42800d; max-mbps=108000; max-fs=3840; > max-br=1920; sar=13 > a=rtpmap:110 H264/90000 > a=fmtp:110 profile-level-id=42800d; packetization-mode=1; max-mbps=108000; > max-fs=3840; max-br=1920; sar=13 > m=application 3236 RTP/AVP 100 > a=sendrecv > a=rtpmap:100 H224/4800 > > > MERCURO SDP Parameters > v=0 > o=- 1234 1235 IN IP4 10.34.77.90 > s=Mercuro IMS Client Session > t=0 0 > m=audio 31098 RTP/AVP 0 8 101 > c=IN IP4 10.34.77.90 > a=rtpmap:0 PCMU/8000/1 > a=rtpmap:8 PCMA/8000/1 > a=rtpmap:101 telephone-event/8000 > a=fmtp:101 0-15 > a=silenceSupp:off - - - - > a=sendrecv > m=video 34442 RTP/AVP 113 > c=IN IP4 10.34.77.90 > a=rtpmap:113 H264/90000 > a=fmtp:113 fmtp:113 profile-level-id=42e00a; packetization-mode=1; > max-br=2000; max-mbps=11880 > a=sendrecv > > Plz tell me is there any limitation from the Asterisk side i.e. H.264 codec > is supported only with limited parameters. > I would like to know what parameters of H.264 codec are supported by Asterisk? > > Your comnments are most welcome. > > Regards, > Durgesh. > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users